How to Service and Repair an Oil Pressure Switch on 2007 Dodge Nitro?

To fix the oil pressure sender, the first thing you should do is disconnect the negative battery cable. Raise the vehicle on a hoist and then remove the front splash shield. Finally, remove the wire from the oil pressure sender and remove the sender itself.

OEM 2007 Dodge Nitro Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2007 Dodge Nitro Switch - Oil Pressure Part Number: 5149097AB
$58.76 MSRP: $88.10
You Save: $29.34 (34%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149097AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Nitro Submodels:
- Heat, SE, SLT, SXT | 3.7L V6, 6 Cyl 3.7 L GAS
View related parts
2007 Dodge Nitro Switch - Oil Pressure Part Number: 5149098AB
$38.57 MSRP: $55.60
You Save: $17.03 (31%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SXT, Shock | 4.0L V6, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Oil Pressure Switch Parts and Q&A

Q: How to Service and Repair an Oil Pressure Switch on 2007 Dodge Nitro?
A: To fix the oil pressure sender, the first thing you should do is disconnect the negative battery cable. Raise the vehicle on a hoist and then remove the front splash shield. Finally, remove the wire from the oil pressure sender and remove the sender itself.