How to Replace a Damaged or Ineffective Air Bag on 2007 Dodge Nitro?

The air bag needs to be discharged to replace a damaged or ineffective side curtain air bag, so begin by removing the negative cable from the battery, wait for two minutes and then discharge the securing capacitor. To avoid any injury from what could be found inside the air bag, use rubber gloves, safety glasses and a shirt that covers your arms. Be sure to prevent anything that is not part of the system from moving into or touching the side curtain air bag. Place the side curtain air bag into the car, forming a unit and press the plastic piece to the inside of the rail to secure the air bag. Place the side curtain air bag under the grab handle bracket on the upper rail just above the rear door and then push in the front plastic connector to secure the unit. Put the end of the air bag tether into the two plastic push-in hook clips and then clip the metal fastener for the tether into the base of the inner A-pillar. With the side rail facing in, lay the air bag mounting tabs and inflator bracket on the seven studs along the inner roof rail and secure with the seven nuts to 8 Nm (71 in. lbs.). Attach the jumper wire harness to the body wire harness connector for the side curtain air bag in the inner D-pillar area close to the belt line and engage the plastic push-in routing clips that hold the jumper wire harness to the inner D-pillar. Once all other parts are in place, set the headliner back in the vehicle, but ensure the negative battery cable is disconnected until the supplemental restraint system is tested after work is done on any related part.

OEM 2007 Dodge Nitro Air Bag

Air Bag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Air Bags found

View related parts
2007 Dodge Nitro Driver Inflator Module, Gray, Driver Side Part Number: 1GC99XDVAK
$1048.82 MSRP: $1530.00
You Save: $481.18 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag - Driver; Steering Wheel Air Bag; Driver Air Bag
- Position: Driver Side
- Replaces: 1GC99XDVAD, 1GC99XDVAF, 1GC99XDVAE, 1GC99XDVAH, 1GC99XDVAB, 5KG07XDVAG, 1GC99XDVAA, 5KG07XDVAD, 1GC99XDVAC, 5KG07XDVAF, 1GC99XDVAJ, 5KG07XDVAE, 5KG07XDVAH
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GC99XDVAK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Passenger Air Bag, Upper Passenger Side Part Number: 5057795AA
$966.38 MSRP: $1410.00
You Save: $443.62 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Passenger; Instrument Panel Air Bag, Upper; Passenger Inflator Module; Air Bag Passenger
- Position: Upper Passenger Side
- Replaces: 5108039AB, 5108039AC, 52029339AD, 5108039AA
- Item Weight: 7.40 Pounds
- Item Dimensions: 15.2 x 10.6 x 9.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5057795AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Driver Inflator Module, Driver Side Part Number: 1GC99ZJ8AK
$946.92 MSRP: $1385.00
You Save: $438.08 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Air Bag - Driver; Steering Wheel Air Bag; Driver Air Bag
- Position: Driver Side
- Replaces: 1GC99ZJ8AE, 5KG07ZJ8AD, 1GC99ZJ8AB, 1GC99ZJ8AF, 1GC99ZJ8AA, 5KG07ZJ8AF, 1GC99ZJ8AC, 5KG07ZJ8AE, 5KG07ZJ8AG, 1GC99ZJ8AD, 5KG07ZJ8AH, 1GC99ZJ8AH
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1GC99ZJ8AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Air Bag Door, Passenger Side Part Number: 5KE24ZJ8AK
$40.53 MSRP: $233.00
You Save: $192.47 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Door - Passenger Air Bag; Door Passenger Air Bag
- Position: Passenger Side
- Replaces: 5KE24ZJ8AG, 5KE24ZJ8AH, 5KE24ZJ8AI, 5KE24ZJ8AE, 5KE24ZJ8AJ, 5KE24ZJ8AF
- Item Weight: 2.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5KE24ZJ8AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Side Impact Inflator Module, Gray, Passenger Side Part Number: 5KE24XDVAK
$42.08 MSRP: $267.00
You Save: $224.92 (85%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Door - Passenger Air Bag; Air Bag Door; Door Passenger Air Bag
- Position: Passenger Side
- Replaces: 5KE24XDVAE, 5KE24XDVAI, 5KE24XDVAH, 5KE24XDVAF, 5KE24XDVAG, 5KE24XDVAJ
- Item Weight: 2.30 Pounds
- Item Dimensions: 20.6 x 11.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5KE24XDVAK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Inflator Curtain, Driver Side Part Number: 52112101AL
$689.29 MSRP: $1005.00
You Save: $315.71 (32%)
Product Specifications
- Other Name: Airbagg - Side Curtain; Curtain Air Bag, Left; Head Air Bag
- Position: Driver Side
- Replaces: 52112101AC, 52112101AD, 52112101AH, 52112101AJ, 52112101AI, 52112101AE, 52112101AF, 52112101AK, 52112101AG
- Item Weight: 7.00 Pounds
- Item Dimensions: 45.3 x 9.8 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52112101AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Inflator Curtain, Passenger Side Part Number: 52112100AL
$689.29 MSRP: $1005.00
You Save: $315.71 (32%)
Product Specifications
- Other Name: Airbagg - Side Curtain; Curtain Air Bag, Right; Head Air Bag
- Position: Passenger Side
- Replaces: 52112100AJ, 52112100AD, 52112100AH, 52112100AI, 52112100AK, 52112100AF, 52112100AC, 52112100AE, 52112100AG
- Item Weight: 4.20 Pounds
- Item Dimensions: 45.7 x 9.8 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52112100AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Side Impact Inflator Module, Passenger Side Part Number: 5KE24DK7AK
Product Specifications
- Other Name: Passenger Air Bag; Air Bag Door; Door Passenger Air Bag
- Position: Passenger Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 21.2 x 10.8 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5KE24DK7AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Air Bag Parts and Q&A

Q: How to Replace a Damaged or Ineffective Air Bag on 2007 Dodge Nitro?
A: The air bag needs to be discharged to replace a damaged or ineffective side curtain air bag, so begin by removing the negative cable from the battery, wait for two minutes and then discharge the securing capacitor. To avoid any injury from what could be found inside the air bag, use rubber gloves, safety glasses and a shirt that covers your arms. Be sure to prevent anything that is not part of the system from moving into or touching the side curtain air bag. Place the side curtain air bag into the car, forming a unit and press the plastic piece to the inside of the rail to secure the air bag. Place the side curtain air bag under the grab handle bracket on the upper rail just above the rear door and then push in the front plastic connector to secure the unit. Put the end of the air bag tether into the two plastic push-in hook clips and then clip the metal fastener for the tether into the base of the inner A-pillar. With the side rail facing in, lay the air bag mounting tabs and inflator bracket on the seven studs along the inner roof rail and secure with the seven nuts to 8 Nm (71 in. lbs.). Attach the jumper wire harness to the body wire harness connector for the side curtain air bag in the inner D-pillar area close to the belt line and engage the plastic push-in routing clips that hold the jumper wire harness to the inner D-pillar. Once all other parts are in place, set the headliner back in the vehicle, but ensure the negative battery cable is disconnected until the supplemental restraint system is tested after work is done on any related part.