How to Service and Repair the Rear Windshield Washer Nozzle on 2007 Dodge Nitro?

Disconnect and isolate the battery negative cable before you service and repair the windshield washer spray nozzle at the rear. Following that, take out the Center High-Mounted Stop Lamp (CHMSL) from the outer panel of the liftgate. After that, pull the rear washer supply hose off the barbed nipple on the nominal rear washer nozzle. At the back of the housing, push in the two latches on the nozzle and pull the nozzle through the face of the lamp lens.

OEM 2007 Dodge Nitro Windshield Washer Nozzle

Front Windshield Washer Nozzle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Windshield Washer Nozzle found

View related parts
2007 Dodge Nitro Washer Nozzle, Front Part Number: 55157319AA
$47.33 MSRP: $68.05
You Save: $20.72 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle - Windshield Washer; Windshield Washer Nozzle, Front; Nozzle Windshield Washer
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.9 x 1.2 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157319AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Windshield Washer Nozzle Parts and Q&A

Q: How to Service and Repair the Rear Windshield Washer Nozzle on 2007 Dodge Nitro?
A: Disconnect and isolate the battery negative cable before you service and repair the windshield washer spray nozzle at the rear. Following that, take out the Center High-Mounted Stop Lamp (CHMSL) from the outer panel of the liftgate. After that, pull the rear washer supply hose off the barbed nipple on the nominal rear washer nozzle. At the back of the housing, push in the two latches on the nozzle and pull the nozzle through the face of the lamp lens.