How to Install a Wiper Motor for the Rear on 2007 Dodge Nitro?

First, fit the rubber bezel and grommet into the liftgate mounting hole, after removing them earlier. Liftgate no. 5, rear wiper motor and bracket should be fitted onto the inner panel as one piece. Mount the bracket to the liftgate by attaching it with the three screws and tightening each to 5.5 Nm (47 in. lbs.). Plug the wire harness connector into the motor connector receptacle and then attach the liftgate inner panel to the trim panel. Once the other work is done, fix the wiper arm onto the end of the output shaft and reattach the battery negative cable.

OEM 2007 Dodge Nitro Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wiper Motors found

View related parts
2007 Dodge Nitro Wiper Motor Part Number: 55157447AA
$102.68 MSRP: $147.00
You Save: $44.32 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Liftgate Wiper; Back Glass Wiper Motor; Rear Motor; Motor Rear Window Wiper; Motor Liftgate Wiper
- Item Weight: 4.40 Pounds
- Item Dimensions: 16.8 x 14.1 x 12.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55157447AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS
View related parts
2007 Dodge Nitro Wiper Linkage Part Number: 68020720AD
Product Specifications
- Other Name: Motor - Windshield Wiper; Wiper Motor; Front Motor; Motor And Linkage Windshield Wiper
- Replaces: 68020720AB, 68020720AA
- Item Weight: 4.70 Pounds
- Item Dimensions: 22.1 x 7.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68020720AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Nitro Submodels:
- Detonator, Heat, R/T, SE, SLT, SXT, Shock | 3.7L V6, 4.0L V6, 6 Cyl 3.7 L GAS, 6 Cyl 4.0 L GAS

2007 Dodge Nitro Wiper Motor Parts and Q&A

Q: How to Install a Wiper Motor for the Rear on 2007 Dodge Nitro?
A: First, fit the rubber bezel and grommet into the liftgate mounting hole, after removing them earlier. Liftgate no. 5, rear wiper motor and bracket should be fitted onto the inner panel as one piece. Mount the bracket to the liftgate by attaching it with the three screws and tightening each to 5.5 Nm (47 in. lbs.). Plug the wire harness connector into the motor connector receptacle and then attach the liftgate inner panel to the trim panel. Once the other work is done, fix the wiper arm onto the end of the output shaft and reattach the battery negative cable.