Other Name: Hinge - Front Door Lower; Door Hinge, Front Left Lower, Front Lower, Front Right Lower; Hinge Front Door Lower Lower; Hinge Front Door Lower; Hinge Door Lower; Hinge Door; Door Hinge
Position: Front Lower
Replaces: 55112146AA, 55112147AA
Item Weight: 2.30 Pounds
Item Dimensions: 6.7 x 4.6 x 3.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55275634AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
Other Name: Hinge - Rear Door Lower; Door Hinge, Rear Left Lower; Hinge Rear Door Lower; Hinge Door Half; Door Hinge
Position: Rear Lower Driver Side
Item Weight: 2.40 Pounds
Item Dimensions: 6.6 x 5.1 x 4.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55277083AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Dodge Ram 1500 Submodels:
Laramie, SLT, ST, SXT, Sport, TRX4 | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2007 Dodge Ram 1500 Door Hinge Parts and Q&A
Q: How to Properly Install a Door Hinge on 2007 Dodge Ram 1500?
A: You should start by putting the upper hinge on door washers, in case they were previously removed, then attach nut (1) and bolt (9), tightening them to 28 Nm (21 ft. lbs.). After that, turn each of the upper hinge bolts (2, 1 and 3) to 28 Nm (21 ft. lbs.). Fix the door if required. Attach the hinge and the b-pillar bolts to the lower hinge and tighten upper hinge bolt (2), upper hinge bolt (1) and upper hinge bolt (3) to 28 Nm (21 ft. lbs.). Replace the hinge to door washers, if you removed them and tighten the nut and bolt to 28 Nm (21 ft. lbs.). If necessary, adjust the door and then finish with the installation of the lower b-pillar trim.