How to Remove and Replace Exhaust Valve and Intake Valves in an Engine on 2007 Dodge Ram 2500?

To replace intake and exhaust valves, clean and inspect for damage to the valves. Replace worn valves, lubricate stems and insert stem in cylinder head. Install new seals, springs and retainers by a process known as valve spring compressor. Measure the height of the spring and then finally, install the cylinder head.

OEM 2007 Dodge Ram 2500 Intake Valve

Engine Intake Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Intake Valves found

View related parts
2007 Dodge Ram 2500 Intake Valve Part Number: 5011879AA
$57.01 MSRP: $117.00
You Save: $59.99 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Kit - Intake; Valve Intake Standard Includes Locks And Seals; Valve Intake Standard; Valve Kit Intake
- Item Weight: 0.60 Pounds
- Item Dimensions: 7.3 x 2.1 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5011879AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 2500 Submodels:
- Base, Laramie, SLT, ST, SXT, Sport, TRX, TRX4 | 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL
View related parts
2007 Dodge Ram 2500 Intake Valve Part Number: 53021550AA
Product Specifications
- Other Name: Valve - Intake; Valve Intake Standard
- Item Weight: 0.60 Pounds
- Item Dimensions: 5.2 x 2.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 8
- SKU: 53021550AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX4 | 8 Cyl 5.7 L GAS

2007 Dodge Ram 2500 Intake Valve Parts and Q&A

Q: How to Remove and Replace Exhaust Valve and Intake Valves in an Engine on 2007 Dodge Ram 2500?
A: To replace intake and exhaust valves, clean and inspect for damage to the valves. Replace worn valves, lubricate stems and insert stem in cylinder head. Install new seals, springs and retainers by a process known as valve spring compressor. Measure the height of the spring and then finally, install the cylinder head.