JeepParts
My Garage
My Account
Cart
OEM 2007 Dodge Ram 3500 Automatic Transmission Filter
AT Filter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Automatic Transmission Filters found
2007 Dodge Ram 3500 Filter Part Number: 52118789
$39.90 MSRP: $57.70You Save: $17.80 (31%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Filter - Valve Body; Transmission Filter; Hydraulic Filter; Filter Valve Body
- Item Weight: 1.00 Pounds
- Item Dimensions: 1.3 x 7.4 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52118789
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Ram 3500 Oil Filter Part Number: 5015267AD
$51.86 MSRP: $77.10You Save: $25.24 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: 4X2 Filter - Transmission Oil; Transmission Filter; Hydraulic Filter; Filter
- Replaces: 5015267AC
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.4 x 5.6 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5015267AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Ram 3500 Oil Filter Part Number: 5179267AD
$37.41 MSRP: $54.00You Save: $16.59 (31%)Product Specifications- Other Name: Filter Package - Transmission Oil; Transmission Filter; Transmission Filter Kit; Hydraulic Filter; Filter; Filter Package Transmission Oil
- Replaces: 5179267AC, 4799662AB, 5179267AA, 5179267AB, 4799662AC, 4799662
- Item Weight: 1.50 Pounds
- Item Dimensions: 3.2 x 3.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5179267AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Dodge Ram 3500 Automatic Transmission Filter Parts and Q&A
- Q: How to Maintain and Repair the Automatic Transmission Filter in a 48RE on 2007 Dodge Ram 3500?A: Raise the vehicle on safety stands and position a wide, shallow pan underneath the 48RE transmission's pan before you start. Disconnect the bolts securing both sides and the front of the pan to the transmission, loosen those at the back and pull out the front while keeping the reusable gasket. When drained, take out the last bolt that is holding the pan and carry it at a level angle to the drain pan to empty the rest. After that, loosen the screws backing up the filter to the valve body, discard the filter, drain the fluid into the drain pan and then dispose of both the fluid and the filter properly. To install the filter, hold it over its valve body and quickly tighten the screws to 4 Nm (35 in.lbs.). Ensure the surfaces of both gaskets on the transmission oil pan and transmission pan rail remain undamaged, then if the ribs are intact, wash the gasket and install it again. Insert the gasket into the oil pan, place it onto the transmission and secure with a few bolts. Next, secure the additional bolts in the oil pan and tighten them to 13.6 Nm (125 in.lbs.), drop the car down onto its wheels and add about 3.8 liters (4.0 quarts) of fluid to the transmission.
Related 2007 Dodge Ram 3500 Parts
2007 Dodge Ram 3500 Transfer Case
2007 Dodge Ram 3500 Clutch Master Cylinder
2007 Dodge Ram 3500 Automatic Transmission Output Shaft Seal
2007 Dodge Ram 3500 Automatic Transmission Shifter
2007 Dodge Ram 3500 Clutch Fork
2007 Dodge Ram 3500 Flywheel
2007 Dodge Ram 3500 Manual Transmission Extension Housing Seal
2007 Dodge Ram 3500 Needle Bearing
2007 Dodge Ram 3500 Pilot Bearing
2007 Dodge Ram 3500 Release Bearing
2007 Dodge Ram 3500 Shift Cable
2007 Dodge Ram 3500 Transmission Pan