How to Replace Hood Hinges Without Detaching the Hood on 2007 Dodge Ram 3500?

Since it is not necessary to take out the hood, just one hinge can be changed at a time. Slide the hood hinge onto the fender rail first and finally slide it to the back position so it sits straight. Connect the hood hinge to the fender rail by using bolts and tighten them to 20 Nm (15 ft. lbs.). After that, fit the bolt holding the front fender to the hood hinge and tighten it to 12.5 Nm (9 ft. lbs.). Install the nuts loosely that attach the hood, carefully align the hood with the marks you made before and tighten the nuts to 23 Nm (17 ft. lbs.). After that, install the support cylinder, adjust the hood to a proper position if it is off and finally put in the wheelhouse splash shield and the cowl grille.

OEM 2007 Dodge Ram 3500 Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Hinges found

View related parts
2007 Dodge Ram 3500 Hinge, Front Passenger Side Part Number: 4589178AA
$69.07 MSRP: $104.00
You Save: $34.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 55275840AC
- Item Weight: 2.40 Pounds
- Item Dimensions: 19.4 x 5.5 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4589178AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2007 Dodge Ram 3500 Hinge, Front Driver Side Part Number: 4589179AA
$69.07 MSRP: $104.00
You Save: $34.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 55275841AC
- Item Weight: 2.40 Pounds
- Item Dimensions: 18.8 x 4.1 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4589179AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS

2007 Dodge Ram 3500 Hood Hinge Parts and Q&A

Q: How to Replace Hood Hinges Without Detaching the Hood on 2007 Dodge Ram 3500?
A: Since it is not necessary to take out the hood, just one hinge can be changed at a time. Slide the hood hinge onto the fender rail first and finally slide it to the back position so it sits straight. Connect the hood hinge to the fender rail by using bolts and tighten them to 20 Nm (15 ft. lbs.). After that, fit the bolt holding the front fender to the hood hinge and tighten it to 12.5 Nm (9 ft. lbs.). Install the nuts loosely that attach the hood, carefully align the hood with the marks you made before and tighten the nuts to 23 Nm (17 ft. lbs.). After that, install the support cylinder, adjust the hood to a proper position if it is off and finally put in the wheelhouse splash shield and the cowl grille.