How to Install a Hood Hinge on Dodge Ram 3500?

Put the hood hinge onto the fender rail and then press it rearward to where the fit is correct. Apply bolts to the end of the hood hinge and tighten them to 20 Nm (15 ft. lbs.) to attach it to the fender rail. Following that, put on the bolt that holds the front fender to the hood hinge and tighten it to 12.5 Nm (9 ft. lbs.). Loosen the nuts that hold the hood, place the hood according to the marks from before and tighten them to 23 Nm (17 ft. lbs.). Insert the support cylinder and if you must, arrange the hood in the correct location. The next step is to put on the wheelhouse splash shield and the cowl grille.

How to Replace a Hood Hinge Without Detaching the Hood on Dodge Ram 3500?

You don't have to take off the hood, as you can change the hinges one by one. You should take away the cowl grille first. Place marks on the hood with green grease pencil where the hinge on the hood being serviced is located. Support the hood and take out the support cylinder from it. After that, loosen the two nuts that hold the hood to the hood hinge, then the bolt that links the front fender to the hood hinge. Take off the wheelhouse splash shield and after that, remove the bolts securing the hood hinge to the fender rail. Then, slide the hood hinge forward and take out the hood.

OEM Dodge Ram 3500 Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hood Hinges found

View related parts
Dodge Ram 3500 Hinge Part Number: 55075794AC
$243.60 MSRP: $360.00
You Save: $116.40 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hinge Hood
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Hinge, Front Driver Side Part Number: 5160345AC
$72.81 MSRP: $110.00
You Save: $37.19 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 5160345AB, 5160345AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Hinge, Front Passenger Side Part Number: 5160344AC
$55.12 MSRP: $112.00
You Save: $56.88 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 5160344AB, 5160344AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2010 Dodge Ram 3500 | Laramie, SLT, ST | 6 Cyl 6.7 L DIESEL, 6.7L L6
View related parts
Dodge Ram 3500 Hinge, Front Passenger Side Part Number: 4589178AA
$69.07 MSRP: $104.00
You Save: $34.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 55275840AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Hinge, Front Driver Side Part Number: 4589179AA
$69.07 MSRP: $104.00
You Save: $34.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 55275841AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2009 Dodge Ram 3500 | Laramie, SLT, ST, SXT, Sport, TRX4 | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 6 Cyl 6.7 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
Dodge Ram 3500 Hinge Part Number: 55075795AC
Product Specifications
- Other Name: Hinge - Hood; Hinge Hood
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2002 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS
View related parts
Dodge Ram 3500 Hinge Part Number: 55076271AB
Product Specifications
- Other Name: Hinge - Hood; Hinge Hood Spare To Setup 55076271Ab
- Replaces: 55076271, 55076271AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2001 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS, 8.0L V10
View related parts
Dodge Ram 3500 Hinge Part Number: 55076270AB
Product Specifications
- Other Name: Hinge - Hood; Hinge Hood Spare To Setup 55076271Ab; Hinge Hood
- Replaces: 55076270AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1994-2001 Dodge Ram 3500 | Base | 10 Cyl 8.0 L GAS, 5.9L L6, 5.9L V8, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.9 L GAS, 8.0L V10

Dodge Ram 3500 Hood Hinge

Choose OEM Hood Hinge that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Hood Hinge follows strict manufacturing steps to lock in quality and fit. If your Dodge Ram 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Ram 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Dodge Ram 3500 Hood Hinge Parts and Q&A

Hinge, Front Passenger Side
4589178AA
Q: How to Install a Hood Hinge on Dodge Ram 3500?
A:
Put the hood hinge onto the Fender rail and then press it rearward to where the fit is correct. Apply bolts to the end of the hood hinge and tighten them to 20 Nm (15 ft. lbs.) to attach it to the fender rail. Following that, put on the bolt that holds the front fender to the hood hinge and tighten it to 12.5 Nm (9 ft. lbs.). Loosen the nuts that hold the hood, place the hood according to the marks from before and tighten them to 23 Nm (17 ft. lbs.). Insert the support cylinder and if you must, arrange the hood in the correct location. The next step is to put on the wheelhouse splash shield and the cowl grille.
Hinge, Front Driver Side
4589179AA
Q: How to Replace a Hood Hinge Without Detaching the Hood on Dodge Ram 3500?
A:
You don't have to take off the hood, as you can change the hinges one by one. You should take away the cowl grille first. Place marks on the hood with green grease pencil where the hinge on the hood being serviced is located. Support the hood and take out the support cylinder from it. After that, loosen the two nuts that hold the hood to the hood hinge, then the bolt that links the front Fender to the hood hinge. Take off the wheelhouse splash shield and after that, remove the bolts securing the hood hinge to the fender rail. Then, slide the hood hinge forward and take out the hood.