Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2007 Dodge Sprinter 2500 Intake Manifold

Engine Intake Manifold
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Intake Manifolds found

  • 2007 Dodge Sprinter 2500 Intake Manifold - 68012310AA
    2007 Dodge Sprinter 2500 Intake Manifold Diagram - 68012310AA
    View related parts

    2007 Dodge Sprinter 2500 Intake Manifold, Driver Side Part Number: 68012310AA

    $849.75 MSRP: $1305.00
    You Save: $455.25 (35%)
    ADD TO CART
    Product Specifications
    • Other Name: Manifold - Intake; Engine Intake Manifold, Left; Manifold Intake
    • Position: Driver Side
    • Item Weight: 11.40 Pounds
    • Item Dimensions: 25.2 x 14.4 x 14.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68012310AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Dodge Sprinter 2500 Submodels:
    • Base | 6 Cyl 3.0 L DIESEL
  • 2007 Dodge Sprinter 2500 Intake Manifold - 68011680AB
    2007 Dodge Sprinter 2500 Intake Manifold Diagram - 68011680AB
    View related parts

    2007 Dodge Sprinter 2500 Intake Manifold Part Number: 68011680AB

    Product Specifications
    • Other Name: Manifold - Intake
    • Replaces: 68011680AA
    • Item Weight: 15.10 Pounds
    • Item Dimensions: 18.2 x 14.7 x 11.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68011680AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Dodge Sprinter 2500 Submodels:
    • Base | 3.5L V6
  • 2007 Dodge Sprinter 2500 Intake Manifold - 68023871AA
    2007 Dodge Sprinter 2500 Intake Manifold Diagram - 68023871AA
    View related parts

    2007 Dodge Sprinter 2500 Intake Manifold, Passenger Side Part Number: 68023871AA

    Product Specifications
    • Other Name: Manifold - Intake; Engine Intake Manifold, Right; Manifold Intake
    • Position: Passenger Side
    • Replaces: 68012303AA
    • Item Weight: 7.00 Pounds
    • Item Dimensions: 18.1 x 9.3 x 5.8 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68023871AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2007 Dodge Sprinter 2500 Submodels:
    • Base | 3.0L V6, 6 Cyl 3.0 L DIESEL

2007 Dodge Sprinter 2500 Intake Manifold Parts and Q&A

  • Q: How to Install and Connect Components to an Intake Manifold on 2007 Dodge Sprinter 2500?
    A: Lay the intake manifold in place and hold it in place with the corresponding bolts. Start with the air pump solenoid vacuum line, add the power brake booster vacuum line next and end with the EVAP purge solenoid hose all at the intake manifold. Place the fuel rail and its bolts and after that, connect the fuel line and fuel rail electrical and injector harness connectors. Guide the engine harness and add the engine harness bolts to keep the harness in place. Afterwards, link the market for Electronic throttle control to its solenoid, add the Mass Air Flow sensor and link it too, then hook up the MAP Sensor harness connector, the Tumbler Valve Solenoid connector, the throttle sensor connector and the Short Runner connector. Connect the left and right hand intake and exhaust camshaft position sensors, along with the crankcase ventilation sensor hose. Secure the oil separator tube to the oil separator and join the power brake booster vacuum line connector to it. Add the PCM brackets and bolts, before fitting the PCM and its connector. After that, put on the intake air tube, then install the air filter housing, refill the coolant and hook up the negative battery cable.

Related 2007 Dodge Sprinter 2500 Parts

Alternate Year Models

+
2006 Dodge Sprinter 2500 Intake Manifold 2008 Dodge Sprinter 2500 Intake Manifold