How to Install a Fuel Level Sensor in a Fuel Pump Module on 2007 Dodge Sprinter 3500?

To put in the fuel level sensor, lead the wires from the 2-wire harness into the sensor's connector, being sure to note where they were before. After that, attach the 2-wire harness connector to the electrical connector found on the pump module. Slide the sensor 4 onto the tracks found on the fuel pump module, snap it into place and only then put in the fuel pump module.

OEM 2007 Dodge Sprinter 3500 Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Level Sensors found

View related parts
2007 Dodge Sprinter 3500 Fuel Pump Gasket Part Number: 68304753AA
$33.39 MSRP: $47.75
You Save: $14.36 (31%)
ADD TO CART
Product Specifications
- Other Name: O Ring - Fuel Pump And Level Unit; Fuel Pump Tank Seal; Fuel Pump Seal; Fuel Pump Assembly Seal; Gasket Fuel Pump
- Replaces: 57009306AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.2 x 6.3 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68304753AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2007 Dodge Sprinter 3500 Fuel Pump Part Number: 68013489AB
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit; Fuel Sender Assembly; Fuel Pump Module; Fuel Sender Unit
- Replaces: 68013489AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 14.1 x 9.7 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68013489AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Dodge Sprinter 3500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2007 Dodge Sprinter 3500 Fuel Level Sensor Parts and Q&A

Q: How to Install a Fuel Level Sensor in a Fuel Pump Module on 2007 Dodge Sprinter 3500?
A: To put in the fuel level sensor, lead the wires from the 2-wire harness into the sensor's connector, being sure to note where they were before. After that, attach the 2-wire harness connector to the electrical connector found on the pump module. Slide the sensor 4 onto the tracks found on the fuel pump module, snap it into place and only then put in the fuel pump module.