How to Install a Fuel Level Sensor on 2008 Dodge Sprinter 3500?

Put the wires from the harness into the connector on the fuel level sensor, remembering their previous following. Then, link the 2-wire harness connector to the pump module's electrical connector. Once you've connected the cable, attach the sending unit to the tracks in the pump module and slide it into place. Make sure to set up the fuel pump module following the Fuel Pump Module Removal/Installation instructions.

OEM 2008 Dodge Sprinter 3500 Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Level Sensors found

View related parts
2008 Dodge Sprinter 3500 Fuel Pump Gasket Part Number: 68304753AA
$32.23 MSRP: $47.75
You Save: $15.52 (33%)
ADD TO CART
Product Specifications
- Other Name: O Ring - Fuel Pump And Level Unit; Fuel Pump Tank Seal; Fuel Pump Seal; Fuel Pump Assembly Seal; Gasket Fuel Pump
- Replaces: 57009306AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.2 x 6.3 x 0.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68304753AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Sprinter 3500 Fuel Pump Part Number: 68013489AB
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit; Fuel Sender Assembly; Fuel Pump Module; Fuel Sender Unit
- Replaces: 68013489AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 14.1 x 9.7 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68013489AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Sprinter 3500 Submodels:
- Base | 3.5L V6, 6 Cyl 3.5 L GAS

2008 Dodge Sprinter 3500 Fuel Level Sensor Parts and Q&A

Q: How to Install a Fuel Level Sensor on 2008 Dodge Sprinter 3500?
A: Put the wires from the harness into the connector on the fuel level sensor, remembering their previous following. Then, link the 2-wire harness connector to the pump module's electrical connector. Once you've connected the cable, attach the sending unit to the tracks in the pump module and slide it into place. Make sure to set up the fuel pump module following the Fuel Pump Module Removal/Installation instructions.