How to Locate and Remove the Fuel Level Sensor from the Fuel Pump Module on Dodge Sprinter 3500?

On the side of the truck's fuel pump module, you will find the fuel level sensor and float assembly. Take out the fuel pump module from the fuel tank as your first step. Gently separate and monitor the wiring colour sequence of the sensor's 2-wire harness from the pump module electrical connection. Take off the connectors with a terminal pick or removal tool to ensure the wires are disconnected from the 2-wire harness electrical connector. To separate the fuel level sensor from the pump module, hold down the tabs by the plastic locks and slowly take the sensor off its tracks.

How to Install a Fuel Level Sensor Correctly on Dodge Sprinter 3500?

To fit the fuel level sensor, join the wires from the 2-wire harness into the sensor's connector and remember how they were arranged before. After that, insert the 2 wire harness on the pump module electrical connector. Set the sending unit 4 on the tracks on the fuel pump module, slide and snap it in and only then install the fuel pump module.

OEM Dodge Sprinter 3500 Fuel Level Sensor

Gas Gauge Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Level Sensors found

View related parts
Dodge Sprinter 3500 Fuel Pump Gasket Part Number: 68304753AA
$32.23 MSRP: $47.75
You Save: $15.52 (33%)
ADD TO CART
Product Specifications
- Other Name: O Ring - Fuel Pump And Level Unit; Fuel Pump Tank Seal; Fuel Pump Seal; Fuel Pump Assembly Seal; Gasket Fuel Pump
- Replaces: 57009306AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Sprinter 3500 | Base | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Dodge Sprinter 3500 Fuel Pump Part Number: 68013489AB
Product Specifications
- Other Name: Module - Fuel Pump/Level Unit; Fuel Sender Assembly; Fuel Pump Module; Fuel Sender Unit
- Replaces: 68013489AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Dodge Sprinter 3500 | Base | 3.5L V6, 6 Cyl 3.5 L GAS

Dodge Sprinter 3500 Fuel Level Sensor

Choose OEM Fuel Level Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Fuel Level Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Sprinter 3500 matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sprinter 3500 parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Dodge Sprinter 3500 Fuel Level Sensor is an important part that highlights the durability as well as efficiency of the Dodge Sprinter 3500 series. This highly developed Fuel Level Sensor is meant to give a precise reading of the topic and as a result enable the drivers to have adequate information of the fuel situation, a key necessity in running the vehicle. Fits wide range of the Dodge Sprinter 3500 of 2003-2009 model year; this component contributes to the vehicle being more economical and safe by protecting it from running out of fuel unexpectedly. Hence, the Dodge Sprinter 3500 Fuel Level Sensor employs the intricately functioned use of a float, an actuating rod and a resistor to provide the vehicle's fuel gauge with accurate fuel level data. This feature alone helps much in the proper management of the fuel and it contributes much to performance of the Dodge Sprinter 3500. It is advised that Fuel Level Sensor should be maintained and calibrated with regular intervals to prevent the inaccuracies; this way, the Dodge Sprinter 3500 will be able to carry on with its tradition of fuel efficiency of about 25 mpg on the highway. Also, the Dodge Sprinter 3500 Fuel Level Sensor can be recognized in the automotive market as a durable and highly reliable one, thus being suitable for those drivers who are keen on the car's performance and safety. Over the years the Fuel Level Sensor has emerged as a vital component in the proper operation of the Dodge Sprinter 3500 while being a true reflection of the company's aim and effort in creating new technologies and prime quality products.

Dodge Sprinter 3500 Fuel Level Sensor Parts and Q&A

Fuel Pump
68013489AB
Q: How to Locate and Remove the Fuel Level Sensor from the Fuel Pump Module on Dodge Sprinter 3500?
A:
On the side of the truck's Fuel Pump module, you will find the fuel level sensor and float assembly. Take out the fuel pump module from the Fuel Tank as your first step. Gently separate and monitor the wiring colour sequence of the sensor's 2-wire harness from the pump module electrical connection. Take off the connectors with a terminal pick or removal tool to ensure the wires are disconnected from the 2-wire harness electrical connector. To separate the fuel level sensor from the pump module, hold down the tabs by the plastic locks and slowly take the sensor off its tracks.
Fuel Pump Gasket
68304753AA
Q: How to Install a Fuel Level Sensor Correctly on Dodge Sprinter 3500?
A:
To fit the fuel level sensor, join the wires from the 2-wire harness into the sensor's connector and remember how they were arranged before. After that, insert the 2 wire harness on the pump module electrical connector. Set the sending unit 4 on the tracks on the Fuel Pump module, slide and snap it in and only then install the fuel pump module.