How to Install a Starter Motor for a 3.7/4.7L Engine on 2007 Jeep Commander?

The first step in installing the starter motor for 3.7/4.7L is to join the solenoid wire to the motor, ensuring it latches in place securely. Put the battery cable onto the solenoid stud, screw in the eyelet nut and tighten it to 19 ft. lbs. (25 Nm). Make sure the battery does not hang off the motor. After that, secure the starter motor onto the transmission. If the vehicle uses an automatic transmission, insert the cooler tube bracket. Screw and tighten both bolts and torque them to 50 ft. lbs. (68 Nm). If your vehicle includes 4WD and a matching transmission, join the two support bracket bolts to the transmission and if it has a front drive shaft, install it too. After that, raise the car, attach the negative cable to the battery and set the vehicle down on the ground.

OEM 2007 Jeep Commander Starter Motor

Starter Ignition

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Starter motors found

View related parts
2007 Jeep Commander Starter Part Number: 56044734AA
$144.63 MSRP: $315.00
You Save: $170.37 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Motor Reman; Starters; Starter Engine
- Item Weight: 7.30 Pounds
- Item Dimensions: 10.3 x 6.4 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56044734AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Sport | 6 Cyl 3.7 L GAS
View related parts
2007 Jeep Commander Starter Part Number: R6044736AB
$125.07 MSRP: $146.00
You Save: $20.93 (15%)
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Replaced by: R6044736AC
- Replaces: 4801253AA, 56044736AB
- Item Weight: 9.40 Pounds
- Item Dimensions: 5.2 x 7.2 x 11.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: R6044736AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- Limited, Overland | 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Commander Starter Part Number: 56044735AC
$465.68 MSRP: $701.00
You Save: $235.32 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Starter - Engine; Starter Motor; Starter Engine
- Item Weight: 6.60 Pounds
- Item Dimensions: 10.3 x 6.3 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56044735AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Commander Submodels:
- 65th Anniversary Edition, Base, Limited, Sport | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2007 Jeep Commander Starter Motor Parts and Q&A

Q: How to Install a Starter Motor for a 3.7/4.7L Engine on 2007 Jeep Commander?
A: The first step in installing the starter motor for 3.7/4.7L is to join the solenoid wire to the motor, ensuring it latches in place securely. Put the battery cable onto the solenoid stud, screw in the eyelet nut and tighten it to 19 ft. lbs. (25 Nm). Make sure the battery does not hang off the motor. After that, secure the starter motor onto the transmission. If the vehicle uses an automatic transmission, insert the cooler tube bracket. Screw and tighten both bolts and torque them to 50 ft. lbs. (68 Nm). If your vehicle includes 4WD and a matching transmission, join the two support bracket bolts to the transmission and if it has a front drive shaft, install it too. After that, raise the car, attach the negative cable to the battery and set the vehicle down on the ground.