JeepParts
My Garage
My Account
Cart
OEM 2007 Jeep Commander Battery Tray
Battery Box- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Battery Tray found
2007 Jeep Commander Battery Tray Part Number: 55396408AE
$73.36 MSRP: $109.00You Save: $35.64 (33%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Support - Battery Tray; Vehicle Battery; Support Battery Tray; Support Battery
- Replaces: 55396408AC, 55396408AD
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.4 x 10.5 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55396408AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2007 Jeep Commander Battery Tray Parts and Q&A
- Q: How to install a battery tray in a gas engine on 2007 Jeep Commander?A: When installing the battery tray for a gas engine, make sure to clean it first. Put the battery tray and support unit in the right front corner of the engine, so that no cables or pipes are accidentally trapped or blocked by them. Attach the back of the battery tray to the front frame rail stud with one nut, tighten it to 7 Nm (65 in. lbs.). After that, put one screw through the left inner fender to secure the other side of the battery tray. Check that it's tightened to 7 Nm (65 in. lbs.). After that, hold the battery tray in place and use two screws to connect it to the inner fender and the bracket under the radiator support. Tighten every screw to 7 Nm (65 in. lbs.). Secure the battery tray to the three pin connector of the harness and attach the battery to the tray last.
Related 2007 Jeep Commander Parts
2007 Jeep Commander Alternator
2007 Jeep Commander Battery Cable
2007 Jeep Commander Car Batteries
2007 Jeep Commander Starter Motor