How to Properly Remove and Replace a Lash Adjuster for Optimal Tappet Installation on 2007 Jeep Compass?

To replace the lifter/lash adjuster, return original tappets to their original locations to avoid engine damage. Lightly oil camshaft tappets before assembly, install them in the cylinder head, and repeat for each tappet. If new tappets are used, perform the valve lash procedure, then install the cylinder head cover.

OEM 2007 Jeep Compass Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
2007 Jeep Compass Valve Lifters Part Number: 4884594AB
$4.45 MSRP: $6.70
You Save: $2.25 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve; Valve Lifter; Tappet; Tappet Valve Solid Bucket Tappets Thickness Is Stamped On Inside Of Bucket.; Tappet Valve See Note
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.6 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884594AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Compass Submodels:
- 75th Anniversary, Altitude, Base, High Altitude, Latitude, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Jeep Compass Lash Adjuster Parts and Q&A

Q: How to Properly Remove and Replace a Lash Adjuster for Optimal Tappet Installation on 2007 Jeep Compass?
A: To replace the lifter/lash adjuster, return original tappets to their original locations to avoid engine damage. Lightly oil camshaft tappets before assembly, install them in the cylinder head, and repeat for each tappet. If new tappets are used, perform the valve lash procedure, then install the cylinder head cover.