OEM 2007 Jeep Compass Rod Bearing

2007 Jeep Compass Rod Bearing Parts and Q&A

• Q: How to measure Rod Bearing Clearances with Plastigage on 2007 Jeep Compass?

  A: You should measure the engine crankshaft bearing clearance with Plastigage, making sure to remove the oil from the area first as it will dissolve in oil. Use a line of Plastigage over the entire width of the journal and don't forget to look at any suspected locations. Apply the proper pushing force to the bearing cap bolts, then remove the cap and see if the flattened Plastigage's width is correct according to the scale printed on the package. If you measure differently at the ends, this reflects the degree of taper, so record every reading. Examine if the clearances in the engine are what is required by the manufacturer. Meters with two scales, one in inches and one in metric, are usually included in Plastigage and it comes in multiple clearance ranges, so choose the best fit for the specification being tested. Put in the right crankshaft bearings to meet the required bearing clearances.