How to Install an Intake Manifold and Its Components on 2007 Jeep Grand Cherokee?

First, put on the intake manifold gaskets, then pull the intake manifold into place. Fix the intake manifold in place with its special bolts, tightening each one in the described order to 12 Nm (105 in. lbs.). After that, place the fuel rail and EGR tube and then install the retaining bolt for the top oil dipstick tube. Torquing the throttle body correctly is necessary and when finished, attach the throttle body to the intake manifold, using the O-ring and tighten the bolts to 7 Nm (60 in. lbs.). You should then connect the electrical connectors for the Manifold Absolute Pressure (MAP) Sensor, Coolant Temperature (CTS) Sensor and ignition coil towers and fit the ignition coil towers. Following that, set up the generator and the compressor for the air conditioning system and join the Vapor purge hose, Brake booster hose and PCV hose. Connect the ETC connector to the throttle body, add fluid to the cooling system and raise the engine using support fixture # 8534. After putting in the right side engine mount bolt, you should take off the engine support fixture. After that, attach the resonator assembly and the air inlet hose, return the negative cable to the battery and carry out the ETC Relearn function with your scan tool.

OEM 2007 Jeep Grand Cherokee Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Intake Manifolds found

View related parts
2007 Jeep Grand Cherokee Plenum Gasket, Passenger Side Part Number: 68064296AA
$1127.10 MSRP: $1725.00
You Save: $597.90 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Right; Intake Plenum Gasket; Intake Plenum; Plenum
- Position: Passenger Side
- Replaces: 68023870AA, 5175642AB, 5175642AC, 68058362AA, 5175642AA
- Item Weight: 4.80 Pounds
- Item Dimensions: 5.7 x 7.4 x 16.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68064296AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
2007 Jeep Grand Cherokee Intake Plenum, Driver Side Part Number: 68030168AA
$863.96 MSRP: $1270.00
You Save: $406.04 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Left; Plenum; Plenum Intake Manifold
- Position: Driver Side
- Item Weight: 6.90 Pounds
- Item Dimensions: 7.0 x 9.3 x 22.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68030168AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland | 6 Cyl 3.0 L DIESEL
View related parts
2007 Jeep Grand Cherokee Intake Manifold Part Number: 53032774AA
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes 1, 3, 4, 5, 6, 12; Manifold Intake
- Item Weight: 13.40 Pounds
- Item Dimensions: 22.2 x 15.1 x 13.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032774AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- 65th Anniversary Edition, Laredo, Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
View related parts
2007 Jeep Grand Cherokee Intake Manifold Part Number: 53032999AD
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes Items 2, 3, 4, 5, 6, 7; Manifold Intake
- Item Weight: 12.10 Pounds
- Item Dimensions: 18.9 x 17.0 x 13.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032999AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Laredo | 6 Cyl 3.7 L GAS
View related parts
2007 Jeep Grand Cherokee Intake Manifold Part Number: 4591846BA
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold; Manifold Intake Includes All Parts Listed Below; Manifold Intake
- Replaces: 4591846AK
- Item Weight: 23.40 Pounds
- Item Dimensions: 29.2 x 20.1 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591846BA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Limited, Overland | 8 Cyl 5.7 L GAS
View related parts
2007 Jeep Grand Cherokee Intake Plenum Part Number: 68012306AA
Product Specifications
- Other Name: Plenum - Intake Manifold
- Replaces: 5175672AA, 5175672AB
- Item Weight: 4.10 Pounds
- Item Dimensions: 19.8 x 8.2 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68012306AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland | 3.0L V6, 6 Cyl 3.0 L DIESEL
View related parts
2007 Jeep Grand Cherokee Intake Manifold Part Number: 5037510AK
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold
- Replaces: 5037510AJ, 5037510AH, 5037510AG, 5037510AI
- Item Weight: 36.80 Pounds
- Item Dimensions: 25.5 x 18.0 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037510AK
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Grand Cherokee Submodels:
- SRT8 | 6.1L V8, 8 Cyl 6.1 L GAS

2007 Jeep Grand Cherokee Intake Manifold Parts and Q&A

Q: How to Install an Intake Manifold and Its Components on 2007 Jeep Grand Cherokee?
A: First, put on the intake manifold gaskets, then pull the intake manifold into place. Fix the intake manifold in place with its special bolts, tightening each one in the described order to 12 Nm (105 in. lbs.). After that, place the fuel rail and EGR tube and then install the retaining bolt for the top oil dipstick tube. Torquing the throttle body correctly is necessary and when finished, attach the throttle body to the intake manifold, using the O-ring and tighten the bolts to 7 Nm (60 in. lbs.). You should then connect the electrical connectors for the Manifold Absolute Pressure (MAP) Sensor, Coolant Temperature (CTS) Sensor and ignition coil towers and fit the ignition coil towers. Following that, set up the generator and the compressor for the air conditioning system and join the Vapor purge hose, Brake booster hose and PCV hose. Connect the ETC connector to the throttle body, add fluid to the cooling system and raise the engine using support fixture # 8534. After putting in the right side engine mount bolt, you should take off the engine support fixture. After that, attach the resonator assembly and the air inlet hose, return the negative cable to the battery and carry out the ETC Relearn function with your scan tool.