How to install a Blower Motor Resistor on 2007 Jeep Patriot?

Once the blower motor resistor is installed it is placed onto the bottom of the HVAC housing. To secure the blower motor resistor on to the HVAC housing, tighten two screws to 1.2 Nm (10 in. lbs.). Reconnect the negative battery cable then connect the wire harness connector to the blower motor resistor.

OEM 2007 Jeep Patriot Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2007 Jeep Patriot Resistor, Front Part Number: 5191344AA
$41.46 MSRP: $61.65
You Save: $20.19 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor, Front; Resistor Blower Motor, includes attaching screws.
- Position: Front
- Item Weight: 0.90 Pounds
- Item Dimensions: 4.9 x 6.5 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5191344AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2007 Jeep Patriot Submodels:
- Latitude, Latitude X, Limited, Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2007 Jeep Patriot Blower Motor Resistor Parts and Q&A

Q: How to install a Blower Motor Resistor on 2007 Jeep Patriot?
A: Once the blower motor resistor is installed it is placed onto the bottom of the HVAC housing. To secure the blower motor resistor on to the HVAC housing, tighten two screws to 1.2 Nm (10 in. lbs.). Reconnect the negative battery cable then connect the wire harness connector to the blower motor resistor.