Other Name: Regulator - Front Door Window; Window Regulator, Front Left; Regulator Front Door Window Includes Screws; Regulator Front Door Window; Window Regulator
Position: Front Driver Side
Item Weight: 3.30 Pounds
Item Dimensions: 30.9 x 8.5 x 8.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68014949AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
Other Name: Regulator - Front Door Window; Window Regulator, Front Right; Regulator Front Door Window Includes Screws; Regulator Front Door Window; Window Regulator
Position: Front Passenger Side
Item Weight: 2.20 Pounds
Item Dimensions: 3.4 x 9.4 x 24.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68014948AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
Other Name: Regulator - Front Door Window; Window Regulator, Front Left; Manual Regulator; Regulator Front Door Window Includes Screws; Regulator Front Door Window
Position: Front Driver Side
Item Weight: 2.50 Pounds
Item Dimensions: 26.2 x 14.2 x 4.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68018025AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
Other Name: Regulator - Front Door Window; Window Regulator, Front Right; Manual Regulator; Regulator Front Door Window Includes Screws; Regulator Front Door Window
Position: Front Passenger Side
Item Weight: 2.20 Pounds
Item Dimensions: 33.3 x 18.4 x 0.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68018024AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
Other Name: Regulator - Rear Door Window; Window Regulator, Rear Left; Regulator Rear Door Window; Window Regulator
Position: Rear Driver Side
Item Weight: 2.20 Pounds
Item Dimensions: 3.7 x 9.8 x 24.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 68014951AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2007 Jeep Wrangler Submodels:
Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
2007 Jeep Wrangler Window Regulator Parts and Q&A
Q: How to Service and Repair a Window Regulator for the Rear Door on 2007 Jeep Wrangler?
A: You should first bring the rear door glass down before you try to service or repair the regulator. Take off the trim panel. Carefully take out the glass disconnect holes plugs when you have one if your boat has them. Take off both glass retainer tabs and take out the glass clip from the regulator lift plate. Next, put the glass into the full up position and secure it with tape or its equivalents. After that, take off the lower B-pillar trim. Cut loose the connection between the door wire harness and the B-pillar and take out the check strap from where it's connected to the hook. Loosen the screws and divide the wires from the door's push pins. Take out the screws that attach the handle to the door and take out the latch screws. Unfasten the foam edge and remove the exterior handle fasteners from the access opening in the carrier plate. After that, unscrew the carrier plate screws and pull out the carrier plate assembly from the door.