How to Remove and Replace a Brake Master Cylinder on 2008 Chrysler 300?

To change the brake master cylinder, take away the access panel and wash the surfaces. Loose the wiring harness and drain the brake fluid reservoir. Do not force the reservoir open, instead, loosen a screw that attaches the reservoir and rock it side-to-side until it comes free and then do away with the seal grommets.

OEM 2008 Chrysler 300 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2008 Chrysler 300 Master Cylinder Part Number: 68033786AA
$201.02 MSRP: $305.00
You Save: $103.98 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.50 Pounds
- Item Dimensions: 11.3 x 6.5 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033786AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler 300 Submodels:
- C, C SRT8, LX, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Chrysler 300 Master Cylinder Part Number: 68033788AA
Product Specifications
- Other Name: Master Cylinder - Brake; Brake Master Cylinder; Master Cylinder Brake
- Item Weight: 2.60 Pounds
- Item Dimensions: 11.6 x 6.6 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68033788AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler 300 Submodels:
- C, C SRT8, LX, Limited, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Chrysler 300 Brake Master Cylinder Parts and Q&A

Q: How to Remove and Replace a Brake Master Cylinder on 2008 Chrysler 300?
A: To change the brake master cylinder, take away the access panel and wash the surfaces. Loose the wiring harness and drain the brake fluid reservoir. Do not force the reservoir open, instead, loosen a screw that attaches the reservoir and rock it side-to-side until it comes free and then do away with the seal grommets.