Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Chrysler 300 Parking Brake Shoe

Emergency Parking Brake Shoe
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Parking Brake Shoe found

  • 2008 Chrysler 300 Parking Brake Shoe - 68020626AB
    2008 Chrysler 300 Parking Brake Shoe Diagram - 68020626AB
    View related parts

    2008 Chrysler 300 Parking Brake Shoes, Rear Part Number: 68020626AB

    $90.76 MSRP: $136.00
    You Save: $45.24 (34%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Shoe Kit - Parking Brake; Parking Brake Shoe, Rear; Disc Brake Hardware Kit; Shoes; Shoe And Lining Kit Parking Brake; Parking Brake Shoe
    • Position: Rear
    • Replaces: 5137624AA, 68020626AA, 68020626AC, 5103204AA
    • Item Weight: 3.20 Pounds
    • Item Dimensions: 10.1 x 6.0 x 3.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 68020626AB
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler 300 Submodels:
    • Base, C, C Luxury, C Platinum, C SRT8, LX, Limited, S, SRT8, SRT8 Core, Signature Series, Touring, Touring L | 2.7L V6, 3.5L V6, 3.6L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6.1L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.4 L GAS

2008 Chrysler 300 Parking Brake Shoe Parts and Q&A

  • Q: How to Remove the Parking Brake Shoe on Each Side on 2008 Chrysler 300?
    A: You should start by getting under the vehicle and raising it to remove the parking brake shoes on both sides. After that, open up the rear hub and take out its bearing. Completely free up the screws that adjust the parking brake shoe. Take out the shipping spring first, then the shoe adjuster. Remove the upper radiator brake shoe hold-down clip and pin and next, the upper brake shoe from the return spring and lever. Take the return spring off the bottom of the shoe and take out the shoe actuator lever from the end of the cable. After that, get rid of the hold-down clip and pin beneath the lower brake shoe. Check the springs, adjuster, lever and aluminum anchor pin for signs of wear or damage and if something is broken, replace it.

Related 2008 Chrysler 300 Parts

Alternate Year Models

+
2007 Chrysler 300 Parking Brake Shoe 2009 Chrysler 300 Parking Brake Shoe