How to Install Car Speakers on 2008 Chrysler Aspen?

Begin by connecting the electrical harness to the door, positioning the speaker inside, fastening it securely with nuts or screws, assembling the door trim panel afterward and then connecting your negative battery cable. Attach the electrical harness to the instrument panel, connect the speaker, fasten all the mountings, fit the panel top cover and just after, fasten the battery negative cable to complete the instrument panel installation. In the rear door, put on the electrical harness plug, position your speaker, screw on the fasteners and attach the door trim panel and negative battery cable. Start by connecting the tweeter's electrical cable to the rear door, then place the tiny speaker in the door panel and attach it with the provided fasteners. After that, put the door panel trim back on and tie the negative battery cable to the metal frame. The final step is to connect the subwoofer's electrical harness connector, place the speaker, bolt down the fasteners, attach the quarter panel trim and then cable the negative battery end.

OEM 2008 Chrysler Aspen Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Car Speakers found

View related parts
2008 Chrysler Aspen Front Driver Speaker, Upper Part Number: 68248827AA
Product Specifications
- Other Name: Speaker - Tweeter; Speaker, Front Upper; Speaker Tweeter for Front/Rear Doors, Right or Left, Upper Door Molding.
- Position: Front Upper
- Replaces: 5091018AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68248827AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Instrument Panel Speaker Part Number: 5091016AA
Product Specifications
- Other Name: Speaker; Speaker 3.5"
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5091016AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Woofer, Rear Part Number: 5091013AA
Product Specifications
- Other Name: Sub Woofer; Speaker, Rear; Speaker Sub Woofer
- Position: Rear
- Item Weight: 5.00 Pounds
- Item Dimensions: 11.4 x 11.4 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5091013AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Chrysler Aspen Door Speaker, Front Part Number: 56046167AB
Product Specifications
- Other Name: Speaker H; Speaker, Front, Rear; Rear Driver Speaker; Speaker; Speaker 6.5"
- Position: Front
- Replaces: 56046167AA
- Item Weight: 2.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56046167AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Aspen Submodels:
- Limited | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2008 Chrysler Aspen Car Speakers Parts and Q&A

Q: How to Install Car Speakers on 2008 Chrysler Aspen?
A: Begin by connecting the electrical harness to the door, positioning the speaker inside, fastening it securely with nuts or screws, assembling the door trim panel afterward and then connecting your negative battery cable. Attach the electrical harness to the instrument panel, connect the speaker, fasten all the mountings, fit the panel top cover and just after, fasten the battery negative cable to complete the instrument panel installation. In the rear door, put on the electrical harness plug, position your speaker, screw on the fasteners and attach the door trim panel and negative battery cable. Start by connecting the tweeter's electrical cable to the rear door, then place the tiny speaker in the door panel and attach it with the provided fasteners. After that, put the door panel trim back on and tie the negative battery cable to the metal frame. The final step is to connect the subwoofer's electrical harness connector, place the speaker, bolt down the fasteners, attach the quarter panel trim and then cable the negative battery end.