How to Install Car Speakers on 2009 Chrysler Aspen?

First, join the electrical wires to the door and put the speaker in place. Secure the fasteners and set the door trim panel in position, then connect the wire and screw it to the door's negative terminal. For the instrument panel speaker, put the electrical harness plug in, mount the speaker, attach and tighten the fasteners and then set the instrument panel top cover in place and connect the battery negative cable. After inserting the rear door electrical connector, position the speaker, fasten the mounting brackets, set the trim panel and attach the negative battery cable. The rear door tweeter must be connected to the electrical harness connector, placed in the door slot, mounted with fasteners, installed in the door and then the negative cable to the battery should be attached. Attach the power cable to the subwoofer, secure it where you want it, put in the fasteners and set the quarter panel trim and negative battery cable.

OEM 2009 Chrysler Aspen Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Car Speakers found

View related parts
2009 Chrysler Aspen Door Speaker, Center Lower Part Number: 5064551AB
$74.49 MSRP: $114.00
You Save: $39.51 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker; Speaker, Center Lower, Center Rear, Rear Lower; Rear Speaker; 6.5" Right/Left Rear Door & Shelf Panel Speakers.
- Position: Center Lower
- Replaces: 5064551AA
- Item Weight: 2.10 Pounds
- Item Dimensions: 10.9 x 8.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064551AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Instrument Panel Speaker, Rear Part Number: 68423513AA
$42.57 MSRP: $62.65
You Save: $20.08 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Speaker; Speaker, Center Rear, Front, Rear, Rear Forward, Rear Upper, Upper; Quarter Panel Speaker; 3.5" speakers for various locations including rear and instrument panel.
- Position: Rear
- Replaces: 5064359AB
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68423513AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited | 4.7L V8, 5.7L V8, 8 Cyl 4.7 L FLEX, 8 Cyl 5.7 L GAS
View related parts
2009 Chrysler Aspen Woofer, Rear Part Number: 5091013AA
Product Specifications
- Other Name: Sub Woofer; Speaker, Rear; Speaker Sub Woofer
- Position: Rear
- Item Weight: 5.00 Pounds
- Item Dimensions: 11.4 x 11.4 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5091013AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2009 Chrysler Aspen Submodels:
- Limited, Limited Hybrid | 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2009 Chrysler Aspen Car Speakers Parts and Q&A

Q: How to Install Car Speakers on 2009 Chrysler Aspen?
A: First, join the electrical wires to the door and put the speaker in place. Secure the fasteners and set the door trim panel in position, then connect the wire and screw it to the door's negative terminal. For the instrument panel speaker, put the electrical harness plug in, mount the speaker, attach and tighten the fasteners and then set the instrument panel top cover in place and connect the battery negative cable. After inserting the rear door electrical connector, position the speaker, fasten the mounting brackets, set the trim panel and attach the negative battery cable. The rear door tweeter must be connected to the electrical harness connector, placed in the door slot, mounted with fasteners, installed in the door and then the negative cable to the battery should be attached. Attach the power cable to the subwoofer, secure it where you want it, put in the fasteners and set the quarter panel trim and negative battery cable.