How to Remove and Repair a Navigation Antenna on 2008 Chrysler Pacifica?

Start by pulling the negative terminal of the battery away and making sure it isn't touching anything before you remove the navigation antenna. After that, lift the right side cowl trim, then take out the right side front and rear sill scuff plates. You should also take out the quarter trim panel on the right side, as well as the liftgate scuff plate. Afterward, remove the navigation unit. After attaching the cables, remove the one from the instrument panel, extract the one on the floor from the retainers and also remove the antenna cable attached to the unit.

OEM 2008 Chrysler Pacifica Antenna

Radio Antenna

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Antennas found

View related parts
2008 Chrysler Pacifica Antenna Mast Part Number: 5064710AA
$26.33 MSRP: $40.05
You Save: $13.72 (35%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Mast - Antenna; Radio Antenna Mast; Antenna; Mast; Mast Antenna
- Replaces: 5064253AB
- Item Weight: 0.60 Pounds
- Item Dimensions: 12.0 x 6.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064710AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Satellite Ant Part Number: 5064724AA
$91.60 MSRP: $149.00
You Save: $57.40 (39%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Antenna - Satellite; Satellite Radio Antenna; Radio Antenna Assembly; GPS Antenna Assembly; Radio Antenna Mast; Antenna; Antenna Satellite
- Replaces: 5091504AB, 5150048AA, 5150048AB
- Item Weight: 0.50 Pounds
- Item Dimensions: 10.2 x 6.8 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064724AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Gps Antenna Part Number: 4685906AA
$13.87 MSRP: $17.59
You Save: $3.72 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Antenna - Global Positioning; GPS Antenna Assembly; Antenna; Antenna Global Positioning
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685906AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Antenna Module Part Number: 5064156AA
Product Specifications
- Other Name: Antenna - Radio Antenna; Radio Antenna Mast; Antenna; Module Radio Antenna
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5064156AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Antenna Parts and Q&A

Q: How to Remove and Repair a Navigation Antenna on 2008 Chrysler Pacifica?
A: Start by pulling the negative terminal of the battery away and making sure it isn't touching anything before you remove the navigation antenna. After that, lift the right side cowl trim, then take out the right side front and rear sill scuff plates. You should also take out the quarter trim panel on the right side, as well as the liftgate scuff plate. Afterward, remove the navigation unit. After attaching the cables, remove the one from the instrument panel, extract the one on the floor from the retainers and also remove the antenna cable attached to the unit.