How to Install an Oil Pressure Switch on 2008 Chrysler Pacifica?

The engine oil pressure sensor/switch is now installed, first by installing the oil pressure switch, torque it to 23 Nm (200 in. lbs.). Then connect the electrical connector to the switch, lower the vehicle. Lower the car and start the engine then check for leaks and finally, check the engine oil level and if needed, adjust.

OEM 2008 Chrysler Pacifica Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2008 Chrysler Pacifica Switch - Oil Pressure Part Number: 5149098AB
$40.91 MSRP: $55.60
You Save: $14.69 (27%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149098AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 3.8L V6, 4.0L V6, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Oil Pressure Switch Parts and Q&A

Q: How to Install an Oil Pressure Switch on 2008 Chrysler Pacifica?
A: The engine oil pressure sensor/switch is now installed, first by installing the oil pressure switch, torque it to 23 Nm (200 in. lbs.). Then connect the electrical connector to the switch, lower the vehicle. Lower the car and start the engine then check for leaks and finally, check the engine oil level and if needed, adjust.