How to Install a Seat Heater Switch into the Rear Floor Console Bezel on 2008 Chrysler Pacifica?

Add the heated switches into place in the back of the rear floor console switch bezel by making sure their retaining tabs are fully engaged. Connect the wire harness connections to the heated seat switches at the rear. After that, push the rear floor console switch bezel into the rear floor console through its front, checking to be sure that all its retaining tabs are inserted properly. Following that, connect the rear floor console. After that, plug in the battery negative cable and try out the second row heated seat system.

OEM 2008 Chrysler Pacifica Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heater Switches found

View related parts
2008 Chrysler Pacifica Seat Switch, Passenger Side Part Number: UF24XDVAA
$5.51 MSRP: $6.98
You Save: $1.47 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Right; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF24XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Pacifica Seat Switch, Driver Side Part Number: UF25XDVAA
Product Specifications
- Other Name: Switch; Seat Heater Switch, Left; Switch Heated Seat; Seat Heater Switch
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF25XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Pacifica Seat Heater Switch Parts and Q&A

Q: How to Install a Seat Heater Switch into the Rear Floor Console Bezel on 2008 Chrysler Pacifica?
A: Add the heated switches into place in the back of the rear floor console switch bezel by making sure their retaining tabs are fully engaged. Connect the wire harness connections to the heated seat switches at the rear. After that, push the rear floor console switch bezel into the rear floor console through its front, checking to be sure that all its retaining tabs are inserted properly. Following that, connect the rear floor console. After that, plug in the battery negative cable and try out the second row heated seat system.