Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Chrysler Sebring Submodels:
LX, Limited, Touring | 2.4L L4, 2.7L V6, 3.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
2008 Chrysler Sebring Door Hinge Parts and Q&A
Q: How to Install a Door Hinge on 2008 Chrysler Sebring?
A: Before installing the front door hinge, you should first paint it if required. First, loosely screw the bolts that secure the hinge to the A-pillar's lower end. Use a proper device to lift the door so that it can be set on the vehicle's hinge. At this step, fasten the bolts that hold the hinge to the door end frame. Position the hinges at the locations you marked earlier and tighten all bolts so that they reach 28 Nm (20 ft. lbs.). After that, check how the door fits and operates and adjust the door hinge if it needs to be straightened.