How to Remove the Upper Intake Manifold on 2008 Chrysler Town & Country?

Before getting rid of the upper intake manifold, make sure to disconnect the negative battery cable. Following these instructions, lift the housing of the air cleaner and take off the inlet hose. After that, remove the engine cover. Take away the ECT harness connector from the throttle body and remove the oil tube from both bolts on the upper intake manifold. Disconnect the Manifold Tuning Valve (MTV) if you have one, in addition to the Short Runner Valve, the Exhaust Gas Recirculation (EGR), the Throttle Position Sensor (TPS), the Idle Air Control (IAC) and the Manifold Absolute Pressure (MAP) sensor. Take out the alternator bracket and unplug the EGR tube. Do not leave hoses connected from the vacuum to the Positive Crankcase Ventilation (PCV) Valve, the EVAP Purge Solenoid or the Power Brake Booster. Take off the plugs holding the two brackets that support the intake manifold, then clear away the bolts on the upper intake manifold and the manifold. Remember to clean all areas where the gasket is supposed to seal.

OEM 2008 Chrysler Town & Country Intake Manifold

Engine Intake Manifold

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Intake Manifolds found

View related parts
2008 Chrysler Town & Country Intake Manifold, Upper Part Number: 4781578AP
$282.12 MSRP: $421.00
You Save: $138.88 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Intake Plenum Gasket; Plenum Gasket; Intake Plenum; Plenum; Plenum Intake Manifold See Important Note
- Position: Upper
- Replaces: 4781578AM, 4781578AL
- Item Weight: 6.00 Pounds
- Item Dimensions: 8.5 x 19.4 x 20.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781578AP
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- LX, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.8L V6, 6 Cyl 3.8 L GAS
View related parts
2008 Chrysler Town & Country Intake Manifold, Lower Part Number: 4892233AA
Product Specifications
- Other Name: Manifold - Intake; Engine Intake Manifold, Lower; Manifold Intake
- Position: Lower
- Item Weight: 7.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892233AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- Limited | 6 Cyl 4.0 L GAS
View related parts
2008 Chrysler Town & Country Intake Manifold Part Number: 4781035AF
Product Specifications
- Other Name: Manifold - Intake
- Item Weight: 13.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781035AF
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Chrysler Town & Country Submodels:
- LX, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
2008 Chrysler Town & Country Intake Manifold Part Number: 4781577AM
Product Specifications
- Other Name: Manifold - Intake Manifold; Plenum Intake Manifold See Important Note
- Replaces: 4781577AL
- Item Weight: 5.00 Pounds
- Item Dimensions: 17.5 x 15.8 x 9.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781577AM
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- LX | 3.3L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2008 Chrysler Town & Country Intake Manifold, Upper Part Number: 4593578AD
Product Specifications
- Other Name: Plenum - Intake Manifold; Engine Intake Manifold, Upper; Intake Plenum; Plenum; Plenum Intake Manifold
- Position: Upper
- Item Weight: 19.40 Pounds
- Item Dimensions: 25.3 x 24.5 x 10.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593578AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- Limited, Touring, Touring Plus | 6 Cyl 4.0 L GAS

2008 Chrysler Town & Country Intake Manifold Parts and Q&A

Q: How to Remove the Upper Intake Manifold on 2008 Chrysler Town & Country?
A: Before getting rid of the upper intake manifold, make sure to disconnect the negative battery cable. Following these instructions, lift the housing of the air cleaner and take off the inlet hose. After that, remove the engine cover. Take away the ECT harness connector from the throttle body and remove the oil tube from both bolts on the upper intake manifold. Disconnect the Manifold Tuning Valve (MTV) if you have one, in addition to the Short Runner Valve, the Exhaust Gas Recirculation (EGR), the Throttle Position Sensor (TPS), the Idle Air Control (IAC) and the Manifold Absolute Pressure (MAP) sensor. Take out the alternator bracket and unplug the EGR tube. Do not leave hoses connected from the vacuum to the Positive Crankcase Ventilation (PCV) Valve, the EVAP Purge Solenoid or the Power Brake Booster. Take off the plugs holding the two brackets that support the intake manifold, then clear away the bolts on the upper intake manifold and the manifold. Remember to clean all areas where the gasket is supposed to seal.