How to Install a Replacement Liftgate Hinge on 2008 Chrysler Town & Country?

If required, the first step in changing the trunk or liftgate hinge is to paint it. Place the hinge on the marks you made on the rear header panel, then fasten the retaining nuts tightening them to 33 Nm (24 ft. lbs.). Ensure the hinge(s) match the marks on the liftgate and put in all the retaining bolts and tighten them to the recommended torque. When completed, undo the fastening and take out the lifting device as well as the tape. In the end, fix the rear header trim panel and check that the liftgate is in line with the rest of the car.

OEM 2008 Chrysler Town & Country Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Liftgate Hinge found

View related parts
2008 Chrysler Town & Country Hinge, Rear Part Number: 5020858AD
$65.67 MSRP: $98.20
You Save: $32.53 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear
- Replaces: 5020858AC, 5020858AA, 5020858AB
- Item Weight: 0.90 Pounds
- Item Dimensions: 4.9 x 4.4 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5020858AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Town & Country Liftgate Hinge Parts and Q&A

Q: How to Install a Replacement Liftgate Hinge on 2008 Chrysler Town & Country?
A: If required, the first step in changing the trunk or liftgate hinge is to paint it. Place the hinge on the marks you made on the rear header panel, then fasten the retaining nuts tightening them to 33 Nm (24 ft. lbs.). Ensure the hinge(s) match the marks on the liftgate and put in all the retaining bolts and tighten them to the recommended torque. When completed, undo the fastening and take out the lifting device as well as the tape. In the end, fix the rear header trim panel and check that the liftgate is in line with the rest of the car.