How to Maintain and Fix a Liftgate Hinge on Chrysler Town & Country?

For service or repair of the trunk or liftgate hinge, you should begin by pulling the liftgate latch and working on the liftgate when it is fully open. Open the liftgate and hold it up by using the appropriate weight lifting equipment. Lay several strips of duct tape over the gap on the roof where it meets the liftgate to keep it in place. Then, come out from under the vehicle and take out the bolts onto which the liftgate is hinged, plus detach the VTSS switch from the main harness. Once you have taken everything apart, remove the bolts fixing the hinge onto the liftgate.

How to Install a Liftgate Hinge Replacement on Chrysler Town & Country?

If you'd like, start by painting the new hinge. Using the marks you drew on the rear panel, place the hinge there and fasten it with the supplied retaining nuts, tightening them at 33 Nm. Set the hinge on the trained marks on the liftgate and insert and tighten the retaining bolts to 33 Nm (24 ft. lbs.). After that, take off the lifting device and the tape from the roof and liftgate and place on the rear header trim panel. Next, see that the liftgate is properly aligned.

OEM Chrysler Town & Country Liftgate Hinge

Luggage Compartment Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Liftgate Hinges found

View related parts
Chrysler Town & Country Hinge Part Number: 5020512AD
$35.87 MSRP: $62.25
You Save: $26.38 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge; Door Hinge; Hinge Liftgate
- Replaces: 5020512AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler Town & Country | Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Hinge Part Number: 5020513AD
$44.84 MSRP: $62.25
You Save: $17.41 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge; Door Hinge; Hinge Liftgate
- Replaces: 5020513AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chrysler Town & Country | Base, LX, Limited, Touring | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Hinge, Rear Part Number: 5020858AD
$65.67 MSRP: $98.20
You Save: $32.53 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge, Rear; Door Hinge; Hinge Liftgate; Liftgate Hinge
- Position: Rear
- Replaces: 5020858AC, 5020858AA, 5020858AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chrysler Town & Country | 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
Chrysler Town & Country Hinge Part Number: 5020513AB
$23.37 MSRP: $33.60
You Save: $10.23 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge; Door Hinge; Hinge Liftgate
- Replaces: 4860295AC, 4860295AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2005 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, SX, Touring | 3.3L V6, 3.5L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Hinge Part Number: 5020512AB
$38.57 MSRP: $55.45
You Save: $16.88 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge; Door Hinge; Hinge Liftgate
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2005 Chrysler Town & Country | Base, EL, EX, LX, LXi, Limited, SX, Touring | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chrysler Town & Country Hinge Part Number: 4673416
Product Specifications
- Other Name: Hinge - Liftgate; Liftgate Hinge; Door Hinge
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1991-1995 Chrysler Town & Country | Base | 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS

Chrysler Town & Country Liftgate Hinge

Choose OEM Liftgate Hinge that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Liftgate Hinge follows strict manufacturing steps to lock in quality and fit. If your Chrysler Town & Country matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Town & Country parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

Chrysler Town & Country Liftgate Hinge Parts and Q&A

Hinge
5020512AD
Q: How to Maintain and Fix a Liftgate Hinge on Chrysler Town & Country?
A:
For service or repair of the trunk or liftgate hinge, you should begin by pulling the liftgate latch and working on the liftgate when it is fully open. Open the liftgate and hold it up by using the appropriate weight lifting equipment. Lay several strips of duct tape over the gap on the roof where it meets the liftgate to keep it in place. Then, come out from under the vehicle and take out the bolts onto which the liftgate is hinged, plus detach the VTSS switch from the main harness. Once you have taken everything apart, remove the bolts fixing the hinge onto the liftgate.
Hinge, Rear
5020858AD
Q: How to Install a Liftgate Hinge Replacement on Chrysler Town & Country?
A:
If you'd like, start by painting the new hinge. Using the marks you drew on the rear panel, place the hinge there and fasten it with the supplied retaining nuts, tightening them at 33 Nm. Set the hinge on the trained marks on the liftgate and insert and tighten the retaining bolts to 33 Nm (24 ft. lbs.). After that, take off the lifting device and the tape from the roof and liftgate and place on the rear header trim panel. Next, see that the liftgate is properly aligned.