How to Maintain and Fix a Shift Cable on 2008 Chrysler Town & Country?

You should begin by detaching the knee blocker to fix or repair the shift cable. Be sure the lock tab on the shift cable is in the down position before taking the cable from the shifter. Next, take out the cable from the shifter, after which remove the gearshift cable from the manual valve lever on the transaxle and remove it from the bracket too. After that, clip off the grommet on the bulkhead and move the cable into the compartment through the hole.

OEM 2008 Chrysler Town & Country Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Shift Cable found

View related parts
2008 Chrysler Town & Country Shift Control Cable Part Number: 4880207AH
Product Specifications
- Other Name: Cable - Gearshift Control; Automatic Transmission Shifter Cable
- Replaces: 4880207AD, 4880207AC, 4880207AF, 4880207AE, 4880207AG
- Item Weight: 1.30 Pounds
- Item Dimensions: 50.2 x 1.8 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4880207AH
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Chrysler Town & Country Submodels:
- LX, Limited, Touring, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Town & Country Shift Cable Parts and Q&A

Q: How to Maintain and Fix a Shift Cable on 2008 Chrysler Town & Country?
A: You should begin by detaching the knee blocker to fix or repair the shift cable. Be sure the lock tab on the shift cable is in the down position before taking the cable from the shifter. Next, take out the cable from the shifter, after which remove the gearshift cable from the manual valve lever on the transaxle and remove it from the bracket too. After that, clip off the grommet on the bulkhead and move the cable into the compartment through the hole.