Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Chrysler Town & Country Valve Body

Trans Valve Body
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Valve Bodies found

  • 2008 Chrysler Town & Country Valve Body - R5078723AF
    2008 Chrysler Town & Country Valve Body - R5078723AF
    2008 Chrysler Town & Country Valve Body Diagram - R5078723AF
    View related parts

    2008 Chrysler Town & Country Valve Body Part Number: R5078723AF

    $788.72 MSRP: $916.00
    You Save: $127.28 (14%)
    Product Specifications
    • Other Name: Valve Bod - Complete; Valve Body Complete
    • Replaces: 5078723AD, R5078723AD, 5078723AC, 5078723AA, 5078723AB, RL078723AD, R5078723AE
    • Item Weight: 14.00 Pounds
    • Item Dimensions: 12.1 x 13.0 x 12.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: R5078723AF
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler Town & Country Submodels:
    • 30th Anniversary Edition, LX, Limited, Limited Platinum, S, Touring, Touring L, Touring Plus, Walter P. Chrysler Signature Series | 3.3L V6, 3.6L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
  • 2008 Chrysler Town & Country Valve Body - RL191759AA
    2008 Chrysler Town & Country Valve Body Diagram - RL191759AA
    View related parts

    2008 Chrysler Town & Country Valve Body Part Number: RL191759AA

    Product Specifications
    • Other Name: Body - Complete
    • Replaces: 5191759AA
    • Item Weight: 13.10 Pounds
    • Item Dimensions: 12.9 x 12.7 x 13.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: RL191759AA
    • Warranty: This genuine part is guaranteed by Mopar's factory warranty.
    More Info
    Fits the following 2008 Chrysler Town & Country Submodels:
    • LX, Limited, Touring | 3.3L V6, 3.8L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Chrysler Town & Country Valve Body Parts and Q&A

  • Q: How to Remove and Replace a Valve Body on 2008 Chrysler Town & Country?
    A: Slowly take the cover panel off the engine and unplug the negative clip from the battery before you handle the valve body. Open the radiator drain, detach the two clamps from the lower radiator hose and take out the hose. Unhook the shift cable from the lever, undo the bolts around the top valve body oil pan and unplug the lone solenoid pack connector under the valve body. Set the vehicle on a hoist and remove the inner wheel splash screws from the front left side inside the wheel opening. Ship the steering wheel left all the way, then unscrew the pressure tap plug at the valve body oil pan. Then, loosen the under pan bolts to drain the transmission fluid and finally detach the valve body. Take apart the electrical connections at the valve body, unscrew the screw at the detente arm and finally remove the detente arm. Unscrew the valve body to valve case bolts after you have pushed the manual valve lever all the way forward. Lift the valve body out of the assembly and raise it far enough that the metal rod past the manual valve pin clears the slot on the rooster comb.

Related 2008 Chrysler Town & Country Parts

Alternate Year Models

+
2009 Chrysler Town & Country Valve Body