How to Remove and Replace a Lash Adjuster on 2008 Dodge Avenger?

To replace the lifter or lash adjuster, remove the cylinder head cover and camshafts first. Then, remove the lash adjusters, marking each of them for reassembling if you intend to reuse it. Remember, replace the adjusters if cylinder head or camshafts are replaced.

OEM 2008 Dodge Avenger Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Lash Adjusters found

View related parts
2008 Dodge Avenger Valve Lifters Part Number: 4884594AB
$4.45 MSRP: $6.70
You Save: $2.25 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve; Valve Lifter; Tappet; Tappet Valve Solid Bucket Tappets Thickness Is Stamped On Inside Of Bucket.; Tappet Valve See Note
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.6 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884594AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- Express, Lux, Mainstreet, R/T, SE, SXT | 4 Cyl 2.4 L GAS
View related parts
2008 Dodge Avenger Valve Lifters Part Number: 4663985
$37.74 MSRP: $56.00
You Save: $18.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Engine Valve Lifter; Valve Lifter; Adjuster Valve Lash
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.7 x 0.8 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663985
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- R/T, SE, SXT | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2008 Dodge Avenger Lash Adjuster Parts and Q&A

Q: How to Remove and Replace a Lash Adjuster on 2008 Dodge Avenger?
A: To replace the lifter or lash adjuster, remove the cylinder head cover and camshafts first. Then, remove the lash adjusters, marking each of them for reassembling if you intend to reuse it. Remember, replace the adjusters if cylinder head or camshafts are replaced.