How to Replace an Oil Filter on 2008 Dodge Avenger?

Before you change the engine's oil and filter, run the engine until it's properly warm, put the vehicle on level ground and then turn it off. Lift up the car on a hoist and remove the oil fill cap before you start. Fit a suitable pan or container beneath the oil pan drain plug (2), take out the drain plug to drain out the oil, inspect whether the drain plug threads show any sign of damage and change the drain plug and gasket if needed. Now, unscrew the oil filter and install a new one, turning it by 14 Nm (10 ft. lbs.). Place and tighten the oil pan drain plug back into place with 40 Nm (30 ft. lbs.) of force. Drop the vehicle, add the required kind and amount of engine oil and put on the oil cap. With the engine running, watch for any leaks and then after stopping, look at the oil level. All engines need a Mopar(R) or similar, full-flow, disposable type oil filter which should be changed out each oil change. Always get rid of used engine oil safely, so it doesn't put your health at risk.

OEM 2008 Dodge Avenger Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oil Filters found

View related parts
2008 Dodge Avenger Oil Filter Part Number: 5281090AB
$7.55 MSRP: $11.15
You Save: $3.60 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Oil Pick-Up; Filter
- Replaces: 5013780AA, 3555556313, 5281090
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.1 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5281090AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- Base, ES, R/T, SE, SXT | 2.7L V6, 3.5L V6, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Avenger Oil Filter Part Number: 4884899AC
$6.87 MSRP: $10.05
You Save: $3.18 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Filter Engine Oil [22Mm]; Filter Engine Oil
- Replaces: 4884899AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.2 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884899AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- R/T, SE, SXT | 2.7L V6, 3.5L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2008 Dodge Avenger Oil Filter Part Number: 4892339BE
$8.85 MSRP: $13.10
You Save: $4.25 (33%)
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Oil Pan; Filter Assembly
- Replaces: 5047769AA, 4892339AA, 4892339AB, 4884900AB, FE00301, 68197769AA
- Item Weight: 7.10 Pounds
- Item Dimensions: 12.9 x 9.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892339BE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Avenger Submodels:
- Express, Lux, Mainstreet, R/T, SE, SXT | 2.4L L4, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS

2008 Dodge Avenger Oil Filter Parts and Q&A

Q: How to Replace an Oil Filter on 2008 Dodge Avenger?
A: Before you change the engine's oil and filter, run the engine until it's properly warm, put the vehicle on level ground and then turn it off. Lift up the car on a hoist and remove the oil fill cap before you start. Fit a suitable pan or container beneath the oil pan drain plug (2), take out the drain plug to drain out the oil, inspect whether the drain plug threads show any sign of damage and change the drain plug and gasket if needed. Now, unscrew the oil filter and install a new one, turning it by 14 Nm (10 ft. lbs.). Place and tighten the oil pan drain plug back into place with 40 Nm (30 ft. lbs.) of force. Drop the vehicle, add the required kind and amount of engine oil and put on the oil cap. With the engine running, watch for any leaks and then after stopping, look at the oil level. All engines need a Mopar(R) or similar, full-flow, disposable type oil filter which should be changed out each oil change. Always get rid of used engine oil safely, so it doesn't put your health at risk.