How to Install an Oil Pressure Switch on 2008 Dodge Caliber?

If you have removed the oil pressure sensor, put in a new sensor instead. Do not make the oil pressure switch too tight, since its grooved threads may damage the engine block. Mount the oil pressure sending unit with socket C-4597, after which tighten it to 8 Nm (71 in. lbs.) and link the electrical connector.

OEM 2008 Dodge Caliber Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2008 Dodge Caliber Oil Pressure Sending Unit Part Number: 68003360AA
$32.96 MSRP: $49.15
You Save: $16.19 (33%)
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Light Switch; Switch Package Oil Pressure; Oil Pressure Switch
- Replaced by: 68003360AC
- Replaces: 5033317AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.9 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68003360AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Caliber Submodels:
- Express, Heat, Mainstreet, R/T, Rush, SE, SRT-4, SXT, SXT Plus, Uptown | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2008 Dodge Caliber Oil Pressure Switch Parts and Q&A

Q: How to Install an Oil Pressure Switch on 2008 Dodge Caliber?
A: If you have removed the oil pressure sensor, put in a new sensor instead. Do not make the oil pressure switch too tight, since its grooved threads may damage the engine block. Mount the oil pressure sending unit with socket C-4597, after which tighten it to 8 Nm (71 in. lbs.) and link the electrical connector.