How to Remove a Blower Motor Resistor on 2008 Dodge Challenger?

The blower motor resistor can be removed by disconnecting the negative battery cable and allowing two minutes to pass so that the airbag system could discharge. Turn the motor of the blower off and allow five minutes to cool the resistor. Next, disassemble the glove box, and unscrew the wire harness, and unscrew the resistor in the HVAC housing.

OEM 2008 Dodge Challenger Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2008 Dodge Challenger Resistor Part Number: 68037310AB
$23.10 MSRP: $34.25
You Save: $11.15 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Resistor - Blower Motor; HVAC Blower Motor Resistor; Resistor Blower Motor; Blower Motor Resistor
- Replaces: 68037310AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.5 x 4.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68037310AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Challenger Submodels:
- R/T, SE, SRT8 | 3.5L V6, 5.7L V8, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Challenger Blower Motor Resistor Parts and Q&A

Q: How to Remove a Blower Motor Resistor on 2008 Dodge Challenger?
A: The blower motor resistor can be removed by disconnecting the negative battery cable and allowing two minutes to pass so that the airbag system could discharge. Turn the motor of the blower off and allow five minutes to cool the resistor. Next, disassemble the glove box, and unscrew the wire harness, and unscrew the resistor in the HVAC housing.