How to remove and replace an oil filter on 2008 Dodge Challenger?

Installing a Mopar(R) filter or equivalent is suggested for replacing the high-quality full-flow, disposable engine oil filter. First, take out the belly pan. Put a drain pan below the oil filter and gently loosen it with a proper tool designed for the filter. With the engine off, counterclockwise rotation should allow you to remove the oil filter from the cylinder block oil filter boss. If the filter isn't attached to the filter housing, carefully lift the filter end to prevent any oil dripping and remove it along with its gasket from your car. After all is said and done, get rid of any oil and grime from the gasket with a cloth.

OEM 2008 Dodge Challenger Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Filter found

View related parts
2008 Dodge Challenger Oil Filter Part Number: 4884899AC
$6.87 MSRP: $10.05
You Save: $3.18 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Filter Engine Oil [22Mm]; Filter Engine Oil
- Replaces: 4884899AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.2 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884899AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Challenger Submodels:
- 392 Hemi Scat Pack Shaker, R/T, R/T 392, R/T Classic, R/T Plus, R/T Plus Shaker, R/T Scat Pack, R/T Scat Pack Shaker Widebody, R/T Scat Pack Widebody, R/T Shaker, SRT 392, SRT Demon, SRT Demon 170, SRT Hellcat, SRT Hellcat Jailbreak, SRT Hellcat Redeye, SRT Hellcat Redeye Jailbreak, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT Super Stock, SRT8, Scat Pack, T/A, T/A 392, T/A 392 Widebody | 5.7L V8, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2008 Dodge Challenger Oil Filter Parts and Q&A

Q: How to remove and replace an oil filter on 2008 Dodge Challenger?
A: Installing a Mopar(R) filter or equivalent is suggested for replacing the high-quality full-flow, disposable engine oil filter. First, take out the belly pan. Put a drain pan below the oil filter and gently loosen it with a proper tool designed for the filter. With the engine off, counterclockwise rotation should allow you to remove the oil filter from the cylinder block oil filter boss. If the filter isn't attached to the filter housing, carefully lift the filter end to prevent any oil dripping and remove it along with its gasket from your car. After all is said and done, get rid of any oil and grime from the gasket with a cloth.