How to Remove a Harmonic Balancer from the Crankshaft Pulley on 2008 Dodge Challenger?

You should first pull the negative cable from the battery to remove the harmonic balancer or crankshaft pulley. After that, remove the accessory drive belt. First, empty the cooling system and next get rid of the upper radiator hose. After that, remove the fan shroud. Loosen the bolt holding the harmonic balancer and now insert Crankshaft Insert 8513A into the end of the crankshaft. Use puller 1023 in order to take out the balancer.

OEM 2008 Dodge Challenger Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Harmonic Balancer found

View related parts
2008 Dodge Challenger Vibration Damper Part Number: 5037394AA
Product Specifications
- Other Name: Damper - Crankshaft; Engine Crankshaft Pulley; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Pulley; Damper Crankshaft
- Item Weight: 7.40 Pounds
- Item Dimensions: 10.8 x 10.5 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5037394AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Challenger Submodels:
- SRT8 | 8 Cyl 6.1 L GAS

2008 Dodge Challenger Harmonic Balancer Parts and Q&A

Q: How to Remove a Harmonic Balancer from the Crankshaft Pulley on 2008 Dodge Challenger?
A: You should first pull the negative cable from the battery to remove the harmonic balancer or crankshaft pulley. After that, remove the accessory drive belt. First, empty the cooling system and next get rid of the upper radiator hose. After that, remove the fan shroud. Loosen the bolt holding the harmonic balancer and now insert Crankshaft Insert 8513A into the end of the crankshaft. Use puller 1023 in order to take out the balancer.