How is a Hood Hinge Installed on 2008 Dodge Charger?

To fit the hood hinge, two screws of 28 Nm are to be used to fix the lower bracket to the front fender. Two screws, at 28 Nm, are used to connect the upper hinge bracket to the hood panel. Install the gas support cylinder if required then remove the support and adjust the hood accordingly.

OEM 2008 Dodge Charger Hood Hinge

Hood Bracket Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Hinges found

View related parts
2008 Dodge Charger Hinge, Front Driver Side Part Number: 5065265AL
$53.90 MSRP: $110.00
You Save: $56.10 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Left; Hinge Hood
- Position: Front Driver Side
- Replaces: 5065265AJ, 5065265AK
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.1 x 5.3 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065265AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2008 Dodge Charger Hinge, Front Passenger Side Part Number: 5065264AL
$53.90 MSRP: $110.00
You Save: $56.10 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge - Hood; Hood Hinge, Front Right; Hinge Hood
- Position: Front Passenger Side
- Replaces: 5065264AK, 5065264AJ
- Item Weight: 2.00 Pounds
- Item Dimensions: 15.2 x 7.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5065264AL
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Base, Pursuit, R/T, SE, SRT8, SXT | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2008 Dodge Charger Hood Hinge Parts and Q&A

Q: How is a Hood Hinge Installed on 2008 Dodge Charger?
A: To fit the hood hinge, two screws of 28 Nm are to be used to fix the lower bracket to the front fender. Two screws, at 28 Nm, are used to connect the upper hinge bracket to the hood panel. Install the gas support cylinder if required then remove the support and adjust the hood accordingly.