How to Remove and Replace an Oil Filter on 2008 Dodge Charger?

This is done to replace the oil filter by cleaning the filter base and lubricating the new gasket with engine oil. Install the filter and tighten it to 16 Nm. Install the splash shield back, pour oil in the crankcase and then start the engine to test against leakage, and check the level of oil on the dipstick.

OEM 2008 Dodge Charger Oil Filter

Engine Oil filter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Filter found

View related parts
2008 Dodge Charger Oil Filter Part Number: 4884899AC
$6.87 MSRP: $10.05
You Save: $3.18 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Filter - Engine Oil; Engine Oil Filter; Filter Change Maintenance Kit; Spin-On Oil Filter; Filter Engine Oil [22Mm]; Filter Engine Oil
- Replaces: 4884899AB
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.1 x 4.2 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4884899AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Charger Submodels:
- Daytona, Daytona 392, Pursuit, R/T, R/T 392, R/T Road & Track, R/T Scat Pack, SE, SRT 392, SRT Hellcat, SRT Hellcat Redeye Widebody, SRT Hellcat Redeye Widebody Jailbreak, SRT Hellcat Widebody, SRT Hellcat Widebody Jailbreak, SRT Jailbreak, SRT8, SXT, Scat Pack, Scat Pack 392 Widebody, Scat Pack Widebody | 2.7L V6, 3.5L V6, 5.7L V8, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 6.1L V8, 6.2L V8, 6.4L V8, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 6.4 L GAS

2008 Dodge Charger Oil Filter Parts and Q&A

Q: How to Remove and Replace an Oil Filter on 2008 Dodge Charger?
A: This is done to replace the oil filter by cleaning the filter base and lubricating the new gasket with engine oil. Install the filter and tighten it to 16 Nm. Install the splash shield back, pour oil in the crankcase and then start the engine to test against leakage, and check the level of oil on the dipstick.