Other Name: Antenna - Keyless Entry; Antenna Keyless Entry
Replaces: 5026232AC, 5026232AB
Item Weight: 0.60 Pounds
Condition: New
Fitment Type: Direct Replacement
SKU: 5026232AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX
2008 Dodge Dakota Antenna Parts and Q&A
Q: How to Maintain the Antenna in a Remote Start Module on 2008 Dodge Dakota?
A: Remote Start Antenna Module Assembly assembly which connects to the WCM/SKREEM with a coaxial cable, two mounting clips and a control module/antenna, should be serviced by removing the negative battery cable as the first step. Following this, get rid of the steering column trim panel first, then the steering column shrouds, the end cap on the passenger's instrument panel and the bezel on the instrument cluster. After that task, bring out the instrument panel cluster and its three plugs, then unclip the upper instrument panel bezel and remove the left A-pillar trim. Remove the screws at the module, unhook the coax retainers from the panel and take off the WCM/SKREEM screws at the steering wheel. Take out the WCM/SKREEM from the slot in your steering wheel and pinch the coax cable connector to cut off both ends of the cable. Take the module off the rest of the instrument panel as you use the edge of the opening in the front to pull the coax cable through.