The Remote Start Antenna Module Assembly is made up of an electrical link to the WCM/SKREEM, part of a coax cable, two fixing clips and a control module/antenna. Guide the coax cable through the panel's openings above and then install the module at the top part of the instrument panel. Fix the module in place with two screws, then connect both coax cable retainers to the instrument panel. Then, join the coax cable electrical connector to the WCM/SKREEM and put it in place on the steering column. First, cut the upper bezel panel from the shell, install the left A-pillar trim next, fit and secure the instrument panel cluster with all related connectors after that, set the bezel in place and then fit the left instrument panel end cap. Lastly, install the trim panel for the steering column and the shrouds and hook back the negative
Battery Cable.