How to Install a Fuel Injector and Ensure It Seals Properly on 2008 Dodge Dakota?

Set each fuel injector into the fuel rail assembly, then hold them together with the retaining clip(s). If you are using the same injectors, use fresh o-rings the second time around. Before installing, use a small amount of clean engine oil on each o-ring injector. Place the fuel rail in place and check the engine for signs of leaking fuel.

OEM 2008 Dodge Dakota Fuel Injector

Gas Injector

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Injectors found

View related parts
2008 Dodge Dakota Injector Part Number: 53032701AA
$97.79 MSRP: $128.00
You Save: $30.21 (24%)
ADD TO CART
Product Specifications
- Other Name: Injector - Fuel; Gasoline Injector; Fuel Injector; Injector Fuel
- Replaces: RL032701AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.1 x 1.5 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53032701AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
- Base, Big Horn, Laramie, Lone Star, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4 | 6 Cyl 3.7 L GAS
View related parts
2008 Dodge Dakota Injector Part Number: 4591851AB
Product Specifications
- Other Name: Injector - Fuel; Fuel Injector; Injector Fuel
- Replaces: 4591851AA, RL591851AA
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.7 x 1.7 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4591851AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
- Big Horn, Laramie, Lone Star, SLT, SXT, Sport, TRX, TRX4 | 8 Cyl 4.7 L FLEX

2008 Dodge Dakota Fuel Injector Parts and Q&A

Q: How to Install a Fuel Injector and Ensure It Seals Properly on 2008 Dodge Dakota?
A: Set each fuel injector into the fuel rail assembly, then hold them together with the retaining clip(s). If you are using the same injectors, use fresh o-rings the second time around. Before installing, use a small amount of clean engine oil on each o-ring injector. Place the fuel rail in place and check the engine for signs of leaking fuel.