Other Name: Pad - Heater; Seat Heater Pad, Front Right, Front Right Lower; Element; Pad Heater Seat Cushion; Pad Heater Cushion; Seat Heater
Position: Front Passenger Side
Replaces: 5189822AA
Item Weight: 0.60 Pounds
Item Dimensions: 10.5 x 6.3 x 6.6 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5000048AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Dakota Submodels:
Big Horn, Laramie, Lone Star, SLT, ST, SXT, Sport, TRX, TRX4 | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS
2008 Dodge Dakota Seat Heater Parts and Q&A
Q: How to Install a Seat Heater on 2008 Dodge Dakota?
A: First, lift off the adhesive backing of the replacement heated seat part (2) and place it right onto the spot where the original one (1) is installed, making sure you don't bend or crease it to prevent premature failure. Proceed by mounting wires 3 and 4, feed the battery negative cable through and then join these two. Then, sit on the seat and check if the heat is coming out. Lastly, add the designated seat cushion or seat back trim cover, guiding the seat harness through both seat and seat back and making sure any surplus wire is tucked in between the foam cushion and the trap carpet behind the trim cover.