How to Install a Coolant Reservoir on 2008 Dodge Durango?

To install the coolant reservoir (5), first install it and snap with mounting bolts (4) tightened to 10 Nm (89 in. lbs.). Then, connect the washer pump electrical connector and then the washer hose (2) and overflow hose. Lastly, fill up the coolant reservoir.

OEM 2008 Dodge Durango Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2008 Dodge Durango Reservoir Tank Part Number: 68026583AB
Product Specifications
- Other Name: Reservoir - Washer And Coolant; Engine Coolant Reservoir; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir; Reservoir Washer And Coolant; Coolant Reservoir
- Replaces: 55078086AE, 68026583AA, 55078086AF
- Item Weight: 2.80 Pounds
- Item Dimensions: 26.7 x 11.7 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 68026583AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS

2008 Dodge Durango Coolant Reservoir Parts and Q&A

Q: How to Install a Coolant Reservoir on 2008 Dodge Durango?
A: To install the coolant reservoir (5), first install it and snap with mounting bolts (4) tightened to 10 Nm (89 in. lbs.). Then, connect the washer pump electrical connector and then the washer hose (2) and overflow hose. Lastly, fill up the coolant reservoir.