How to service an Oil Pressure Switch on 2008 Dodge Durango?

The first step to service the oil pressure sender is to remove the negative battery cable. Put the vehicle on a hoist and remove the front splash shield. Next, unscrew the connector of the oil pressure switch and remove the pressure switch.

OEM 2008 Dodge Durango Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oil Pressure Switches found

View related parts
2008 Dodge Durango Oil Pressure Sensor Part Number: 5149062AB
$58.92 MSRP: $86.70
You Save: $27.78 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Oil Pressure; Engine Oil Pressure Switch; Oil Pressure Gauge Switch; Oil Pressure Switch; Pressure Switch; Pressure Sensor; Oil Pressure Sending Unit; Sending Unit
- Replaces: 5149062AA, 68060337AA
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 6.1 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5149062AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Citadel, Crew, Express, GT, Heat, Limited, Limited Hybrid, R/T, Rallye, SE, SLT, SXT, Special Service | 5.7L V8, 6 Cyl 3.6 L FLEX, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2008 Dodge Durango Switch - Oil Pressure Part Number: 5149097AB
$58.76 MSRP: $88.10
You Save: $29.34 (34%)
ADD TO CART
Product Specifications
- Other Name: SWITCH-OIL PRESSURE
- SKU: 5149097AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Durango Submodels:
- Adventurer, Limited, SE, SLT, SXT | 3.7L V6, 4.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS

2008 Dodge Durango Oil Pressure Switch Parts and Q&A

Q: How to service an Oil Pressure Switch on 2008 Dodge Durango?
A: The first step to service the oil pressure sender is to remove the negative battery cable. Put the vehicle on a hoist and remove the front splash shield. Next, unscrew the connector of the oil pressure switch and remove the pressure switch.