How is the Crankshaft Removed from an Engine on 2008 Dodge Grand Caravan?

You should first disassemble the engine from the chassis and then put the engine on a stand. After that, take off the oil filter, the oil pan and the oil pick-up tube. After that, take the timing chain cover off and remove the chain and sprockets. Following this, take out the rear seal for the crankshaft and its retainer. After rotating the crankshaft, paint mark or scribe where the connecting rod cap is. Cautiously take off the cap covering the connecting rod bearing, not damaging the crankshaft's bearing surfaces and repeat this procedure for every connecting rod bearing cap. After taking apart the engine, toss out the main bearing cross bolts and their washers and install a new assembly when assembling again. Take out the bearing cap bolts and remove the main bearing caps. After that, remove the crankshaft from beneath the engine's cylinder block.

OEM 2008 Dodge Grand Caravan Crankshaft

Crank Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Crankshafts found

View related parts
2008 Dodge Grand Caravan Crankshaft Part Number: 4621983AD
$299.79 MSRP: $1045.00
You Save: $745.21 (72%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Crankshft
- Replaces: 4621983AB
- Item Weight: 47.30 Pounds
- Item Dimensions: 25.8 x 8.2 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4621983AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- Base, C/V, EL, ES, LE, SE, SE Plus, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
2008 Dodge Grand Caravan Pulley Part Number: 4892108AA
Product Specifications
- Other Name: Crankshft; Harmonic Balancer; Crankshaft
- Item Weight: 52.20 Pounds
- Item Dimensions: 23.7 x 9.1 x 8.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4892108AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
- SXT | 6 Cyl 4.0 L GAS
View related parts
2008 Dodge Grand Caravan Crankshaft Part Number: 4781507AD
Product Specifications
- Other Name: Crankshft
- Replaces: 4781507AC, 4781071AB, 4781071AC
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4781507AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Grand Caravan Submodels:
- Anniversary Edition, Base, EL, ES, EX, SXT, Sport | 3.8L V6, 6 Cyl 3.8 L GAS

2008 Dodge Grand Caravan Crankshaft Parts and Q&A

Q: How is the Crankshaft Removed from an Engine on 2008 Dodge Grand Caravan?
A: You should first disassemble the engine from the chassis and then put the engine on a stand. After that, take off the oil filter, the oil pan and the oil pick-up tube. After that, take the timing chain cover off and remove the chain and sprockets. Following this, take out the rear seal for the crankshaft and its retainer. After rotating the crankshaft, paint mark or scribe where the connecting rod cap is. Cautiously take off the cap covering the connecting rod bearing, not damaging the crankshaft's bearing surfaces and repeat this procedure for every connecting rod bearing cap. After taking apart the engine, toss out the main bearing cross bolts and their washers and install a new assembly when assembling again. Take out the bearing cap bolts and remove the main bearing caps. After that, remove the crankshaft from beneath the engine's cylinder block.