Other Name: Switch - Multifunction; Turn Signal & Combination Lever; Windshield Washer Switch.; Wiper Switch; Switch Multifunction
Replaces: 56046114AD, 56046114AC, 56046114AE
Item Weight: 3.20 Pounds
Item Dimensions: 3.2 x 3.5 x 9.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 56046114AF
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
American Value Package, C/V, Crew, Express, GT, Mainstreet, R/T, SE, SE 30th Anniversary Edition, SE Plus, SXT, SXT 30th Anniversary Edition | 3.3L V6, 3.8L V6, 4.0L V6, 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
Other Name: Switch - Lighting Control; Headlight Switch; Switch And Bezel Lighting Control
Item Weight: 0.80 Pounds
Item Dimensions: 8.2 x 4.1 x 4.1 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4602762AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2008 Dodge Grand Caravan Submodels:
C/V, SE, SXT | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
2008 Dodge Grand Caravan Headlight Switch Parts and Q&A
Q: How to Service and Repair the Headlight Switch on 2008 Dodge Grand Caravan?
A: The first thing to do when fixing or repairing the headlamp switch is to unhook and isolate the battery's negative lead. With Dodge vehicles, take a trim stick or an equal tool, pop the trim piece from the dashboard just next to the door and then unplug the connector. Press down on the tabs on the switch and it will come out of the trim plate. With Chrysler models, disconnect the negative battery terminal and then lift the switch away from the bezel at the side of the dashboard with a trim stick. First, take out the electrical connector from the switch and then remove the entire switch from the vehicle.