How to Service and Repair a Brake Light Switch on 2008 Dodge Grand Caravan?

From the battery, detach and separate the negative cable before beginning any work on the brake light switch. After that, take out the silencer panel near the floor, as well as the knee blocker. Unscrew the switch counterclockwise a little over 30 degrees and take it out of the bracket once removed. Once that's done, allow the hold-down tab to unlock and remove the wiring connector from the switch. The final step is to realize the brake lamp switch should be trashed.

OEM 2008 Dodge Grand Caravan Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Dodge Grand Caravan Switch Package - Stop Lamp Part Number: 5083344AB
Product Specifications
- Other Name: SW PKG-STOP LAMP
- SKU: 5083344AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2008 Dodge Grand Caravan Submodels:
- Anniversary Edition, Base, C/V, EL, ES, EX, SE, SE Plus, SXT, Sport | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2008 Dodge Grand Caravan Brake Light Switch Parts and Q&A

Q: How to Service and Repair a Brake Light Switch on 2008 Dodge Grand Caravan?
A: From the battery, detach and separate the negative cable before beginning any work on the brake light switch. After that, take out the silencer panel near the floor, as well as the knee blocker. Unscrew the switch counterclockwise a little over 30 degrees and take it out of the bracket once removed. Once that's done, allow the hold-down tab to unlock and remove the wiring connector from the switch. The final step is to realize the brake lamp switch should be trashed.